X675-.047-10-10000 ASC Capacitors, X675-.047-10-10000 Datasheet - Page 4

• Manufacturer Part Number: X675-.047-10-10000
• Description: Capacitor, Metallized Polyester; 0.047uF; Axial; 10000VDC; +/-10%; 1In.Dia.; 3.969In.
• Manufacturer: ASC Capacitors

Specifications of X675-.047-10-10000

• Brand/series: X675 Series
• Capacitance: 0.047 μF
• Diameter: 1 in.
• Dissipation Factor: <1.0 %
• Dissipation Factor, Test Condition: (When referred to 1000 Hz and 25°C)
• Insulation Resistance: >25000 Megohms
• Insulation Resistance, Test Condition: @ 25 °C
• Lead Size: 20 AWG
• Length: 3.969 in.
• Length, Lead: 1.625 in. (Min.)
• Material, Element: Polyester Metallized
• Temperature, Operating, Maximum: 65 °C
• Temperature, Operating, Minimum: -55 °C
• Termination: Axial
• Tolerance: ±10 %
• Voltage, Rating: 10000 VDC
• Capacitance Tolerance: 10% Also Available in 5%, 2% and 1%
• Lead Free Status / Rohs Status: RoHS Compliant part

PHYSICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
ADDITIONAL INFORMATION
Phone: [phone]
Fax: [phone]
CONSTRUCTION: NON-INDUCTIVE WOUND METALLIZED POLYESTER.
CASE: FLAME RETARDANT TAPE WRAP CASE AND EPOXY FILL.
LEAD MATERIAL: AXIAL SOLDER COATED OR TINNED SOLID WIRE, AWG AS SPECIFIED IN TABLES.
DIMENSIONS: AS SPECIFIED IN TABLES.
CAPACITANCE: AS SPECIFIED IN TABLES ± REQUESTED TOLERANCE WHEN MEASURED AT OR
REFERRED TO 1000 ± 20 Hz AND 25 ± 5 °C.
TOLERANCE: ±5%, ±10%, AND ±20% AVAILABLE. OTHER TOLERANCES AVAILABLE UPON REQUEST.
DISSIPATION FACTOR: SHALL NOT BE GREATER THAN 1.0% WHEN MEASURED AT OR REFERRED TO
1000 ± 20 Hz AND 25 ± 5 °C.
INSULATION RESISTANCE: SHALL BE GREATER THAN 25,000 M FOR CAPACITANCE VALUES 0.40 µF
AND LESS OR 10,000 M X µF FOR CAPACITANCE VALUES GREATER THAN 0.40 µF WHEN MEASURED
AFTER 2 MINUTES ELECTRIFICATION AT 500VDC AND 25 ± 5 °C.
DIELECTRIC STRENGTH: 140% RATED VOLTAGE FOR 10 SECONDS THROUGH A LIMITING
RESISTANCE OF 100 OHMS/VOLT AT 25 ± 5 °C.
RATED VOLTAGE: 2000VDC, 4000VDC, 6000VDC, 8000VDC, 10000VDC, AND 16000VDC AVAILABLE.
TEMPERATURE: -55 °C TO +65 °C AT FULL RATED VOLTAGE OPERATIONAL TEMPERATURE, TO +85 °C
WITH 25% VOLTAGE DERATING, +105 °C MAX STORAGE TEMPERATURE.
ORDERING INFORMATION: ALL ASC CAPACITORS ARE ORDERED BY "FAMILY CAP-TOL-VOLT"
DESIGNATION. (I.E. TO ORDER AN X675 0.047µF, ±5%, 10000VDC CAPACITOR, REQUEST PART
NUMBER "X675 .047-5-10000")
SEE ALSO: "GENERAL INFORMATION - POLYESTER CAPACITORS" DOCUMENT FOR ADDITIONAL
PHYSICAL, ELECTRICAL, AND PERFORMANCE CHARACTERISTICS NOT MENTIONED IN THIS FILE.
WARNING: INFORMATION ON THIS FILE IS SUBJECT TO CHANGE WITHOUT NOTICE AT ASC'S
DISCRETION.
METALLIZED POLYESTER
TAPE WRAP AND EPOXY FILL CASE
301 WEST O STREET
GENERAL SPECIFICATIONS
OGALLALA, NE 69153
e-mail: [e-mail]
web: www.ascapacitor.com
X675
LAST MODIFIED: 08/23//01
PAGE 4 OF 4