ULN2004AFWG(5,M) Toshiba, ULN2004AFWG(5,M) Datasheet - Page 11

IC DRIVER DARL 7CH 50V.5A 16-SOL

ULN2004AFWG(5,M)

Manufacturer Part Number
ULN2004AFWG(5,M)
Description
IC DRIVER DARL 7CH 50V.5A 16-SOL
Manufacturer
Toshiba
Type
Darlington Arrayr
Datasheet

Specifications of ULN2004AFWG(5,M)

Number Of Drivers/receivers
7/0
Mounting Type
Surface Mount
Package / Case
16-SOL
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Voltage - Supply
-
Protocol
-
Other names
ULN2004AFWD(5,M)
ULN2004AFWG
ULN2004AFWG(O,M)
Notes on Contents
IC Usage Considerations
1. Equivalent Circuits
2. Test Circuits
Notes on Handling of ICs
The equivalent circuit diagrams may be simplified or some parts of them may be omitted for explanatory
purposes.
Components in the test circuits are used only to obtain and confirm the device characteristics. These
components and circuits are not guaranteed to prevent malfunction or failure from occurring in the
application equipment.
(1)
(2)
(3)
(4)
(5)
The absolute maximum ratings of a semiconductor device are a set of ratings that must not be
exceeded, even for a moment. Do not exceed any of these ratings.
Exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result
injury by explosion or combustion.
Use an appropriate power supply fuse to ensure that a large current does not continuously flow in
case of over current and/or IC failure. The IC will fully break down when used under conditions that
exceed its absolute maximum ratings, when the wiring is routed improperly or when an abnormal
pulse noise occurs from the wiring or load, causing a large current to continuously flow and the
breakdown can lead smoke or ignition. To minimize the effects of the flow of a large current in case of
breakdown, appropriate settings, such as fuse capacity, fusing time and insertion circuit location, are
required.
If your design includes an inductive load such as a motor coil, incorporate a protection circuit into the
design to prevent device malfunction or breakdown caused by the current resulting from the inrush
current at power ON or the negative current resulting from the back electromotive force at power OFF.
IC breakdown may cause injury, smoke or ignition.
Use a stable power supply with ICs with built-in protection functions. If the power supply is unstable,
the protection function may not operate, causing IC breakdown. IC breakdown may cause injury,
smoke or ignition.
Do not insert devices in the wrong orientation or incorrectly.
Make sure that the positive and negative terminals of power supplies are connected properly.
Otherwise, the current or power consumption may exceed the absolute maximum rating, and
exceeding the rating(s) may cause the device breakdown, damage or deterioration, and may result
injury by explosion or combustion.
In addition, do not use any device that is applied the current with inserting in the wrong orientation
or incorrectly even just one time.
Carefully select external components (such as inputs and negative feedback capacitors) and load
components (such as speakers), for example, power amp and regulator.
If there is a large amount of leakage current such as input or negative feedback condenser, the IC
output DC voltage will increase. If this output voltage is connected to a speaker with low input
withstand voltage, overcurrent or IC failure can cause smoke or ignition. (The over current can cause
smoke or ignition from the IC itself.) In particular, please pay attention when using a Bridge Tied
Load (BTL) connection type IC that inputs output DC voltage to a speaker directly.
11
ULN2003,04APG/AFWG
2006-06-14

Related parts for ULN2004AFWG(5,M)