PIC32MX664F064LT-I/PT Microchip Technology Inc., PIC32MX664F064LT-I/PT Datasheet - Page 3

• Manufacturer Part Number: PIC32MX664F064LT-I/PT
• Description: 100 TQFP 12X12X1MM T/R, 100 PINS, 64KB FLASH, 32KB RAM, 80 MHZ, USB, ETHERNET, 4
• Manufacturer: Microchip Technology Inc.

Specifications of PIC32MX664F064LT-I/PT

• A/d Inputs: 16-Channel, 10-Bit
• Comparators: 2
• Eeprom Memory: 0 Bytes
• Input Output: 85
• Interface: I2C/SPI/UART/USB
• Memory Type: Flash
• Number Of Bits: 32
• Package Type: 100-pin TQFP
• Programmable Memory: 64K Bytes
• Ram Size: 32K Bytes
• Speed: 80 MHz
• Temperature Range: –40 to +85 °C
• Timers: 5-16-bit
• Voltage, Range: 2.3-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part

High-Performance 32-bit RISC CPU:
• MIPS32
• 80 MHz maximum frequency
• 1.56 DMIPS/MHz (Dhrystone 2.1) performance
• Single-cycle multiply and high-performance divide
• MIPS16e
• Two sets of 32 core register files (32-bit) to reduce
• Prefetch Cache module to speed execution from
Microcontroller Features:
• Operating voltage range of 2.3V to 3.6V
• 64K to 512K Flash memory (plus an
• 16K to 128K SRAM memory
• Pin-compatible with most PIC24/dsPIC
• Multiple power management modes
• Multiple interrupt vectors with individually
• Fail-Safe Clock Monitor mode
• Configurable Watchdog Timer with on-chip
Peripheral Features:
• Atomic SET, CLEAR and INVERT operation on
• Up to 8-channels of hardware DMA with automatic
• USB 2.0-compliant full-speed device and
• 10/100 Mbps Ethernet MAC with MII and RMII
• CAN module:
• 3 MHz to 25 MHz crystal oscillator
© 2010 Microchip Technology Inc.
at zero Wait state Flash access
unit
interrupt latency
Flash
additional 12 KB of Boot Flash)
devices
programmable priority
Low-Power RC oscillator for reliable operation
select peripheral registers
data size detection
On-The-Go (OTG) controller:
- Dedicated DMA channels
interface:
- Dedicated DMA channels
- 2.0B Active with DeviceNet™ addressing
- Dedicated DMA channels
support
®
®
M4K
mode for up to 40% smaller code size
High-Performance, USB, CAN and Ethernet
®
32-bit core with 5-stage pipeline
32-bit Flash Microcontrollers
PIC32MX5XX/6XX/7XX
®
DSC
Peripheral Features (Continued):
• Internal 8 MHz and 32 kHz oscillators
• Six UART modules with:
• Up to four SPI modules
• Up to five I
• Separate PLLs for CPU and USB clocks
• Parallel Master and Slave Port (PMP/PSP) with
• Hardware Real-Time Clock and Calendar (RTCC)
• Five 16-bit Timers/Counters (two 16-bit pairs
• Five Capture inputs
• Five Compare/PWM outputs
• Five external interrupt pins
• High-speed I/O pins capable of toggling at up
• High-current sink/source (18 mA/18 mA) on
• Configurable open-drain output on digital I/O pins
Debug Features:
• Two programming and debugging Interfaces:
• Unintrusive hardware-based instruction trace
• IEEE Standard 1149.2 compatible (JTAG)
Analog Features:
• Up to 16-channel, 10-bit Analog-to-Digital
• Two Analog Comparators
- RS-232, RS-485 and LIN support
- IrDA
8-bit and 16-bit data, and up to 16 address lines
combine to create two 32-bit timers)
to 80 MHz
all I/O pins
- 2-wire interface with unintrusive access and
- 4-wire MIPS
boundary scan
Converter:
- 1 Msps conversion rate
- Conversion available during Sleep and Idle
decoder
real-time data exchange with application
Action Group (JTAG) interface
®
with on-chip hardware encoder and
2
C™ modules
®
standard enhanced Joint Test
DS61156F-page 3