MT-6 Curtis Industries, MT-6 Datasheet - Page 43

• Manufacturer Part Number: MT-6
• Description: TERM BARRIER 6 TERM DUAL ROW
• Manufacturer: Curtis Industries
• Series: Mr

Specifications of MT-6

• Terminal Block Type: Barrier Block
• Number Of Circuits: 6
• Number Of Positions: 12
• Pitch: 0.500" (12.70mm)
• Number Of Rows: 2
• Current: 15A
• Voltage: -
• Wire Gauge: 14-22 AWG
• Mounting Type: Chassis Mount or Panel Mount
• Top Termination: Screws
• Bottom Termination: Closed
• Barrier Type: 2 Wall (Dual)
• Features: Flange
• Color: -
• Operating Temperature: 150°C
• Material - Insulation: Phenol Formaldehyde (Phenolic)
• Material Flammability Rating: UL94 V-0
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: MT-6CU

Specifications:
Center-to-Center Spacing: 7/16" (11 .11mm)
Wire Range:
No. of Terminals: 2 thru 164
Voltage Rating: CSA & UL: 600V
Tightening Torque:
Current Rating: WT, WTC: 50A, WH: 75A
Housing:
Breakdown Voltage: WT
Note: Specifications contained herein are subject to change
Series W Accessories
MARKING STRIPS
White fiber marking strip available in two or three-pole lengths
or in pre-punched 100-ft . rolls .
To order, specify:
Part No . 271A11 (2PW)
Part No . 271A13 (3PW)
100-ft . Rolls – Part No . 20W
Pins – Part No . 21W
Dimensions are in inches and millimeters
unless otherwise specified.
Values in parentheses are metric equivalents .
TERMINAL JUMPER CONNECTS
Brass jumper connects 12 consecutive
terminals and can be cut for shorter
applications . Part No . 271-A72
Type 275-A16 is designed to
connect two adjacent terminals
of WT and WTC assembles .
Part No . 275-A16
WT – No . 16AWG to No . 8AWG
WTC – No . 22AWG to No . 8AWG
WH – No . 22AWG to No . 8AWG
WT, WTC
WH
Material
Continuous Use
Flammability Rating
Water Absorption
Chemical Resistance
Terminal - Terminal
Terminal - Ground
Temp . (UL Index)
(24 hrs . % wt . gain)
solvents
without notice .
25 in .-lb .
45 in .-lb . (4-6AWG)
40 in .-lb . (8AWG)
35 in .-lb . (10-14 AWG)
10,100V Typ. 10,100V Typ.
6,300V Typ. 5,100V Typ. 10,500V Typ.
Phenolic
150°C (302°F)
94V-1
0 .5%
Resistant to most organic
WTC
WH
Curtis Industries
7,700V Typ.
A Division of Powers Holdings, Inc.
Tracks
Features:
• STURDY TRACK – constructed of heavy steel with zinc-
• ECONOMICAL STANDARD LENGTHS – mounting track
How to Order
When ordering non-DIN track to a specified size, simply
designate model followed by length required, expressed in
poles . Example: SW with space for 24 poles plus two mounting
holes becomes stock number SW-24 . For standard three and
six foot lengths, simply designate model followed by 96 or 192
respectively (SW Series) or 82/164 (W Series) . Examples:
SW-96 or SW-192; W-82 or W-164 . For DIN track, specify DT
and length of track desired (in 2 .5 centimeter increments) . For
example, DT-10 designates DIN track 10 centimeters in length .
Dimensions are ± .10 cm .
Fuse blocks, knife switches and WH Type terminal assembles
are the same width as two-pole W modules and therefore
require twice the space of a single pole W .
• PRE-CUT TRACK – available for large volume work where
• SW, DSW, W AND DW SERIES COMPATIBILITY – track
dichromate plating . Mounting holes are 7/32 inch diameter
and provided continuously on 3/8 inch center-to-center
spacing (SW Series) and 7/16 inch centers (W Series) . DIN
mounting holes are slots .248" wide by .709" long on .984"
center-to-center spacing .
available in three and six-foot pre-cut lengths for self-cutting
to application needs . DIN track available in two meter (78 .74")
lengths .
identical lengths are used . Save cutting time in your plant .
accommodates both W and SW Series of snap-in track type
modules with any combination of terminal assemblies, fuse
blocks, circuit breakers, etc . DIN track accommodates DW
and DSW Series modules .
1-800-657-0853
41