SLXT914QC.B3 Intel, SLXT914QC.B3 Datasheet - Page 17

• Manufacturer Part Number: SLXT914QC.B3
• Description: IC QUAD ETHERNET REPEATER 100QFP
• Manufacturer: Intel
• Type: Repeaterr

Specifications of SLXT914QC.B3

• Rohs Status: RoHS non-compliant
• Tx/rx Type: Ethernet
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 180mA
• Mounting Type: Surface Mount
• Package / Case: 100-QFP
• Delay Time: -
• Capacitance - Input: -
• Other names: 831521

Figure 3.
Datasheet
Global State Machine
1. Syncs to the 1 MHz Serial Clock (SCLK) input. SCLK is supplied by the First Position
2. Responds to SENI Low by enabling the SDI port.
3. Clocks 48 bits from the EEPROM into its setup register through the SDI port.
4. Asserts SENO Low to enable the next repeater in line.
repeater.
Collin(ANYXM) = SQE
Collin(ONLY1) = SQE *
TT(ALL) 96:[M Port(Collin = SQE)]
TRANSMIT COLLISION
Intel
Collin(ALL) = SQE * TT(ALL) 96 * Tw2Done
Out (All) = Jam
Out (ALLXM) = Jam
ONE PORT LEFT
Collin(ANYXN) = SQE
Collin(ANYXN) = SQE
®
Order Number: 248989, Revision: 003
LXT914 Flexible Quad Ethernet Repeater
Datain(M) = II*
Collin(ALL) = SQE*
Tw2Done
Collin(ANYXN) = SQE
Power On
Datain(ANY) = II * Collin(ALL) = SQE:[N Port(Datain = II)]
TT(ALLXN)
TwoOnesSent * Collin(ALL) = SQE * Datain(N) = II
Out (ALLXN) = Preamble Pattern
SEND PREAMBLE PATTERN
Out (ALLXN) = TwoOnes
62 * DataRdy * Collin(ALL) = SQE * Datain(N) = II
Out (ALLXN) = Data
SEND TWO ONES
Out(ALL) = Idle
Out (ALL) = Idle
SEND DATA
StartTw1
UCT
START
WAIT
Begin
IDLE
Datain(N) = II *
Collin(ALL) = SQE *
TT(ALLXN)
AllDataSent
Collin(ANY) = SQE + Tw1Done
Collin(ANYXN) = SQE
Collin(N) = SQE + Datain(N) = II *
Collin(ALL) = SQE *
AllDataSent * TT(ANAYXN) < 96
Collin(N) = SQE + Datain = II * Collin(ALL) = SQE
Intel
Collin(N) = SQE + Datain(N) = II * Collin(ALL) = SQE
96 *
®
LXT914 Flexible Quad Ethernet Repeater
Collin(ANY) = SQE[N Port(Collin = SQE)]
RECEIVE COLLISION
Out (ALLXN) = Jam
Datain(N) = II *
Collin(ALL) = SQE *
TT(ALLXN)
Tw2Done
96 *
31-Oct-2005
17