BMA222 Bosch Sensortec, BMA222 Datasheet - Page 71

• Manufacturer Part Number: BMA222
• Description: 3-AXIS ACCELEROMETER DIGITAL SMD
• Manufacturer: Bosch Sensortec

Specifications of BMA222

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 828-1025-2

BMA222
Bosch Sensortec
Data sheet
8.6 Handling instructions
Micromechanical sensors are designed to sense acceleration with high accuracy even at low
amplitudes and contain highly sensitive structures inside the sensor element. The MEMS sensor
can tolerate mechanical shocks up to several thousand g's. However, these limits might be
exceeded in conditions with extreme shock loads such as e.g. hammer blow on or next to the
sensor, dropping of the sensor onto hard surfaces etc.
We recommend to avoid g-forces beyond the specified limits during transport, handling and
mounting of the sensors in a defined and qualified installation process.
This device has built-in protections against high electrostatic discharges or electric fields (e.g.
2kV HBM); however, anti-static precautions should be taken as for any other CMOS component.
Unless otherwise specified, proper operation can only occur when all terminal voltages are kept
within the supply voltage range. Unused inputs must always be tied to a defined logic voltage
level.
8.7 Tape and reel specification
The BMA222 is shipped in a standard cardboard box.
The box dimension for 1 reel is: L x W x H = 35cm x 35cm x 6cm
BMA222 quantity: 10,000pcs per reel, please handle with care.
Figure 27: Tape and reel dimensions in mm
Rev. 1.0
Page 71
07 March 2011
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
as copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.