S19202CBI30 Applied Micro Circuits Corporation, S19202CBI30 Datasheet

no-image

S19202CBI30

Manufacturer Part Number
S19202CBI30
Description
Manufacturer
Applied Micro Circuits Corporation
Datasheet

Specifications of S19202CBI30

Lead Free Status / Rohs Status
Not Compliant
GANGES
STS-192 SONET/SDH FRAMER AND POS/ATM MAPPER
• Supports a single STS-192/STM-64 or quad STS-48/STM-
• Terminates and generates SONET/SDH section, line, &
• Supports independent loop timing when in quad STS-48/
• Supports protection switching (APS) between two Ganges
• Provides an Optical Internetworking Forum (OIF) SFI-4
• Provides a 64-bit, 200 MHz FlexBus 4 system interface
• Support mixed ATM and POS data termination, config-
• 16-bit synchronous microprocessor interface for configura-
• Packaged in a 624-pin CBGA.
• Implemented in .18 micron, 1.8V and 2.5V technology.
• Supports full duplex mapping of ATM cells or packets for a
Features
TX_DATA_OUT[15:0]
16 line interfaces on the line side and on the protection
port. Each STS-48/STM-16 can support a concatenated
payload or can be channelized down to STS-12c/AU-4-4c.
path layers on the line side and APS port, with transport/
section E1, E2, F1 and DCC overhead interfaces in both
transmit and receive directions.
STM-16 mode.
devices or between two fiber optics modules
compliant 622.08 MHz, 16-bit bus LVDS interface on the
line side in both the TX and RX directions.
that supports the transfer of either packets or ATM cells.
urable on a per-tributary basis
tion, control, and status monitoring.
single STS-192c/AU-4-64c, four STS-48c/AU-4-16c or six-
teen STS-12c/AU-4-4c SONET/SDH payloads.
TX_CLK_OUT[1:4]
RX_DATA_IN[15:0]
RX_CLK_IN_[1:4]
S19202 Block Diagram
LOC
DET
LBK
SEL
TOH INSERT
TOH EXTRACT
FRGEN
TOH
FRMR
MON.
FRTX
x4
x4
PROT TX
FR GEN x4
RX PROT
MUX
FRM x4
SEL
S
E
L
INTERPRETER
POINTER
GENERATOR
SPE/VC
AMCC
x16
x16
The Ganges IC is a highly integrated VLSI device that pro-
vides full duplex mapping of Packets or ATM cells into
SONET/SDH payloads at rates up to 9.95Gb/s.
Ganges provides full section and line overhead processing
for either a single STS-192/STM-64, or four STS-48/STM-16.
It supports framing, scrambling and descrambling, alarm sig-
nal insertion and detection, and bit interleaved parity (B1/B2)
processing. It also provides path overhead processing for
STS-192c/AU-4-64c, STS-48c/AU-4-16c or STS-12c/AU-4-
4c SONET/SDH payloads and includes bit interleaved parity
(B3) processing.
The automatic protection switching (APS) port of the Ganges
supports generation and termination of SONET/SDH section
and line, as well as TOH insertion and extraction. This allows
inter-device protection switching between two Ganges
devices or intra-device protection between two fiber optics
modules.
The Ganges is SONET/SDH standards compliant with
Bellcore GR-253, ITU G.707, and ANSI T1.105 -1995.
Applications
MICROPROCESSOR I/F
General Description
• Core ATM switches and IP Routers (POS)
• ATM, POS and Frame Relay line cards in Edge and Metro
• Direct Mapping of any traffic type in SONET/SDH STS-192/
Switches
STM-64 and STS-48/STM-16 payloads
Product Brief Revision 3.1 - January 2002
GENERATION
MONITOR
POH
POH
JTAG
x16
x16
HDLC /ATM
HDLC /ATM
/
Proc
Proc
Part Number - S19202CBI30
x16
x16
Production Release Information - The information con-
tained in this document is about a product in its fully tested
and characterized stage. All features described herein are
supported. Contact AMCC for updates to this document and
the latest product status.
PRODUCT BRIEF
ATM/POS
SYSTEM
ATM/POS
INTRFC/
SYSTEM
INTRFC/
FIFO
FIFO
x16
x16
STX_DATA_IN[63:0]
SRX_DATA_OUT[63:0]
Control
Control

Related parts for S19202CBI30

S19202CBI30 Summary of contents

Page 1

... SPE/VC POH GENERATOR GENERATION SEL x16 x16 MONITOR S POH E POINTER L x16 INTERPRETER x16 RX PROT JTAG FRM x4 AMCC Part Number - S19202CBI30 PRODUCT BRIEF SYSTEM INTRFC/ Control ATM/POS / HDLC /ATM STX_DATA_IN[63:0] FIFO x16 Proc x16 SYSTEM SRX_DATA_OUT[63:0] INTRFC/ HDLC /ATM Proc ATM/POS x16 ...

Page 2

... STS-192 four STS-48/STM-16 SONET/SDH Line. This includes TOH add/drop as well section and line monitor- ing. This APS port can directly interface to a fiber optics module or to the APS port of a mate S19202CBI30. ATM Processing When configured ...

Related keywords