ZBZ1604 Crouzet USA, ZBZ1604 Datasheet - Page 112

• Manufacturer Part Number: ZBZ1604
• Description: 17C8378
• Manufacturer: Crouzet USA

Specifications of ZBZ1604

• Features: Red, Metal
• Rohs Compliant: Yes
• For Use With: 40mm Emergency Stop And Mushroom Head Pushbuttons

Push Buttons & Operator Interface - XAL Control Stations
General Characteristics
Contact Block Characteristics (continued)
Specific Characteristics of Light Modules with Protected LED
112
Electrical Characteristics
Cabling capacity
Contact material
Short-circuit protection
Rated insulation voltage
Rated impulse withstand voltage
Rated operational characteristics
Conforming to IEC/EN 60947-5-1
Electrical durability
Conforming to IEC/EN 60947-5-1
Appendix C
Operating rate 3600 operating cycles/hour.
Load factor: 0.5
Electrical reliability
Mechanical Characteristics
Vibration resistance
Shock resistance
Electrical Characteristics
Cabling capacity
Rated insulation voltage
Rated impulse withstand voltage
Voltage limits
Current consumption
Service life
Surge withstand
Resistance to fast transients
Resistance to electromagnetic fields
Resistance to electrostatic discharges
Electromagnetic emission
© 1999-2005 Schneider Electric All Rights Reserved
Conforming to IEC 60947-1
Conforming to IEC/EN 60947-5-1
Conforming to IEC 60947-1
Conforming to IEC 60947-1
AC supply:
Utilization category AC-15
DC supply:
Utilization category DC-13
AC supply for 1 million operating cycles,
utilization category AC-15
DC supply for 1 million operating cycles,
utilization category DC-13
Failure rate
Conforming to IEC 947-5-4
Conforming to IEC 60068-2-6
Conforming to IEC 60068-2-27
Conforming to IEC 60947-1
Conforming to IEC 60947-1
Conforming to IEC 60947-1
Nominal voltage
Applicable to all colors
At nominal voltage and at an ambient
temperature of 77 °F (25 °C)
Conforming to IEC 61000-4-5
Conforming to IEC 61000-4-4
Conforming to IEC 61000-4-3
Conforming to IEC 61000-4-2
Conforming to EN 55011
Screw and captive clamp terminals
Min: 1 x 24 AWG (0.22 mm
Max: 2 x 16 AWG (1.5 mm
Cross headed screw (Pozidrive type 1) slotted for flat 4 and 5.5 mm screwdriver
Silver alloy (Ag/Ni)
Standard blocks with screw clamp terminals: 10 A
(gG cartridge fuse conforming to IEC 60269-1)
Standard blocks with screw clamp terminals:
Ui = 600 V, degree of pollution 3
Standard block with screw clamp terminals: Uimp = 6 kV
A600: Ue = 600 Vac and le = 1.2 A or Ue = 240 Vac and le = 3 A
or Ue = 120 Vac and le = 6 A
R300: Ue = 250 Vdc and le = 0.1 A or Ue = 125 Vdc and le = 0.22 A
24 Vac
4 A
24 Vdc
0.4 A
Standard blocks:
- at 17 V and 5 mA, λ < 10
- at 5 V and 1 mA, λ < 10
Frequency (2 to 500 Hz): 15 gn
Half sine wave acceleration 11 ms: 50 gn
Half sine wave acceleration 18 ms: 30 gn
Screw and captive clamp terminals
Min: 1 x 24 AWG (0.22 mm
Max: 2 x 16 AWG (1.5 mm
Pilot light blocks with protected LED:
Ui = 250 V, degree of pollution 3
Pilot light blocks with protected LED: Uimp = 4 kV
24 V: 19.2 to 30 Vdc; 21.6 to 24.6 Vac
120V: 102 to 132 Vac
240V: 195 to 264 Vac
24 Vac/Vdc supply blocks: 18 mA
120 Vac supply blocks: 14 mA
240 Vac supply blocks: 14 mA
100,000 hours
2/1 kV
2 kV
10 V/m
8/6 kV
Class B
Typical torque: 0.8 N•m (8.55 lb-in)
Maximum torque: 1.2 N•m (10.7 lb-in)
1 x 22 AWG (0.34 mm
1 x 22 AWG (0.34 mm
-6
-8
2
2
) with cable end
) with cable end
2
2
2
2
) without cable end
) for linking
) without cable end
) for linking
120 Vac
3 A
110 Vdc
0.15 A
230 Vac
2 A
04/2005