HFBR5905 Avago Technologies, HFBR5905 Datasheet

no-image

HFBR5905

Manufacturer Part Number
HFBR5905
Description
Manufacturer
Avago Technologies
Datasheet
AFBR-5905Z/5905AZ
ATM Multimode Fiber Transceivers
in 2 x 5 Package Style
Data Sheet
Description
The AFBR-5905Z family of transceivers from Avago pro-
vide the system designer with products to implement a
range of solutions for multimode fiber SONET OC-3 (SDH
STM-1) physical layers for ATM and other services. These
transceivers are all supplied in the new industry standard
2 x 5 DIP style with a MT-RJ fiber connector interface.
ATM 2 km Backbone Links
The AFBR-5905Z is a 1300 nm product with optical perfor-
mance compliant with the SONET STS-3c (OC-3) Physical
Layer Interface Specification. This physical layer is defined
in the ATM Forum User-Network Interface (UNI) Speci-
fication Version 3.0. This document references the ANSI
T1E1.2 specification for the details of the interface for 2
km multimode fiber backbone links. The ATM 100 Mb/s-
125 MBd Physical Layer interface is best implemented
with the AFBR- 5903Z family of FDDI Transceivers which
are specified for use in this 4B/5B encoded physical layer
per the FDDI PMD standard.
Transmitter Sections
The transmitter section of the AFBR-5905Z utilizes a 1300
nm InGaAsP LED. This LED is packaged in the optical sub-
assembly portion of the transmitter section. It is driven by
a custom silicon IC which converts differential PECL logic
signals, ECL referenced (shifted) to a +3.3 V supply, into an
analog LED drive current.
Description
The AFBR-5905Z family of
transceivers from Agilent
provide the system designer
with products to implement a
range of solutions for
multimode fiber SONET OC-3
(SDH STM-1) physical layers
for ATM and other services.
These transceivers are all
supplied in the new industry
standard 2 x 5 DIP style with
a MT-RJ fiber connector
interface.
ATM 2 km Backbone Links
The AFBR-5905Z is a 1300 nm
product with optical
performance compliant with
the SONET STS-3c (OC-3)
Physical Layer Interface
Specification. This physical
layer is defined in the ATM
Forum User-Network Interface
(UNI) Specification Version 3.0.
This document references the
ANSI T1E1.2 specification for
the details of the interface for
2 km multimode fiber
backbone links.
The ATM 100 Mb/s-125 MBd
Physical Layer interface is best
implemented with the AFBR-
5903Z family of FDDI
Transceivers which are
specified for use in this 4B/5B
encoded physical layer per the
FDDI PMD standard.
Features
• Multisourced 2 x 5 package style with MT-RJ
• Single +3.3 V power supply
• Wave solder and aqueous wash process compatibility
• Full compliance with ATM Forum UNI SONET OC-3
• RoHS compliant
• Receiver output squelch function enabled
Applications
• Multimode fiber ATM backbone links
• Multimode fiber ATM wiring closet to desktop links
Ordering Information
The AFBR-5905Z 1300 nm product is available for produc-
tion orders through the Avago Component Field Sales Of-
fices and Authorized Distributors world wide.
receptacle
multimode fiber physical layer specification
AFBR-5905Z = 0°C to +70°C
AFBR-5905AZ = -40°C to +85°C.
in 2 x 5 Package Style
Data Sheet
Transmitter Sections
The transmitter section of the
AFBR-5905Z utilizes a 1300
nm InGaAsP LED. This LED is
packaged in the optical
subassembly portion of the
transmitter section. It is driven
by a custom silicon IC which
converts differential PECL
logic signals, ECL referenced
(shifted) to a +3.3 V supply,
into an analog LED drive
current.
Receiver Sections
The receiver section of the
AFBR-5905Z utilizes an
InGaAs PIN photodiode
coupled to a custom silicon
transimpedance preamplifier
IC. It is packaged in the
optical subassembly portion of
the receiver.
This PIN/preamplifier combina-
tion is coupled to a custom
quantizer IC which provides
the final pulse shaping for the
logic output and the Signal
Detect function. The Data
output is differential. The
Signal Detect output is single-
ended. Both Data and Signal
Detect outputs are PECL
compatible, ECL referenced
(shifted) to a 3.3 V power
supply. The receiver outputs,
Data Out and Data Out Bar,
Features
• Multisourced 2 x 5 pack
• Single +3.3 V power sup
• Wave solder and aqueo
• Full compliance with AT
• RoHS compliant
• Receiver output squelch
Applications
• Multimode fiber ATM ba
• Multimode fiber ATM w
Ordering Information
The AFBR-5905Z 1300
product is available fo
production orders thro
Agilent Component Fie
Offices and Authorized
Distributors world wid
AFBR-5905Z = 0°C to
AFBR-5905AZ
+85°C.
with MT-RJ receptacle
process compatibility
UNI SONET OC-3 multim
physical layer specifica
enabled
links
closet to desktop links
= -40°

Related parts for HFBR5905

HFBR5905 Summary of contents

Page 1

AFBR-5905Z/5905AZ ATM Multimode Fiber Transceivers Package Style Data Sheet Description The AFBR-5905Z family of transceivers from Agilent provide the system designer Description with products to implement a The AFBR-5905Z family of transceivers from Avago pro- range ...

Page 2

Receiver Sections The receiver section of the AFBR-5905Z utilizes an InGaAs PIN photodiode coupled to a custom silicon transimped- ance preamplifier IC packaged in the optical sub- are squelched at Signal Detect assembly portion of the receiver. This ...

Page 3

OVERALL RECEPTACLE CENTER LINE) Case temperature measurement point 13.59 9.6 (0.378) (0.535) MAX. MAX. 12 (0.472) 9.3 9.8 (0.366) (0.386) MAX. MAX. Ø 1.07 (0.042) DIMENSIONS IN MILLIMETERS (INCHES) NOTES: 1. THIS PAGE DESCRIBES THE MAXIMUM ...

Page 4

RX Top View RECEIVER SIGNAL GROUND RECEIVER POWER SUPPLY o o SIGNAL DETECT 3 o RECEIVER DATA OUT BAR RECEIVER DATA OUT Figure 3. Pin Out Diagram. Pin Descriptions: Pin Descriptions: Pin 1 Receiver ...

Page 5

Application Information The Applications Engineering group is available to assist 125 µm fiber cables only. The you with the technical understanding and design trade- area under the curves offs associated with these transceivers. You can contact represents the remaining OPB ...

Page 6

Transceiver Signaling Operating Rate Range and BER Performance For purposes of definition, the symbol (Baud) rate, also called signaling rate, is the reciprocal of the symbol time. Data rate (bits/sec) is the symbol rate divided by the en- coding factor ...

Page 7

Board Layout - Decoupling Circuit, Ground Planes and Termination Circuits Board Layout - Decoupling Circuit, Ground Planes and It is important to take care in Termination Circuits the layout of your circuit It is important to take care in the ...

Page 8

Note 100 nF Figure 8. Alternative Termination Circuits 7.11 Ø 1.4 ±0.1 (0.28) (0.055 KEEP OUT AREA ...

Page 9

Regulatory Compliance Regulatory Compliance These transceiver products are These transceiver products are intended to enable com- intended to enable commercial mercial system designers to develop equipment that com- system designers to develop plies with the various international regulations governing equipment ...

Page 10

OF PCB TO MIN. BOTTOM OF OPENING) DIMENSIONS IN MILLIMETERS (INCHES) Figure 10. Recommended Panel Mounting Absolute Maximum Ratings Stresses in excess of the absolute ...

Page 11

Recommended Operating Conditions Parameter Ambient Operating Temperature AFBR-5905 AFBR-5905A Supply Voltage Data Input Voltage - Low Data Input Voltage - High Data and Signal Detect Output Load Differential Input Voltage (p-p) Notes: A. Ambient Operating Temperature corresponds to transceiver case ...

Page 12

Transmitter Optical Characteristics AFBR-5905Z (T = 0°C to +70° AFBR-5905AZ (T = -40°C to +85° Parameter Output Optical Power BOL 62.5/125 µ 0.275 Fiber EOL Output Optical Power BOL 50/125 µ ...

Page 13

... For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2008 Avago Technologies Limited. All rights reserved. ...

Related keywords