hsdl-1001 Agilent Technologies, Inc., hsdl-1001 Datasheet
hsdl-1001
Available stocks
Related parts for hsdl-1001
hsdl-1001 Summary of contents
Page 1
... IR signals for through-air, serial, half-duplex IR data links and is designed to satisfy the IrDA Physical Layer Specification for data rates up to 115 Kb/s. The HSDL-1001 contains a high speed, high efficiency TS AlGaAs 875 nm LED, a silicon PIN photodiode and a bipolar, silicon TXD RXD ...
Page 2
Package Dimensions Option 0X1* 0.43 MAX. (0.017) 3.4 ± 0.25 (0.14 ± 0.01) 8.54 ± 0.15 MAX. (0.336 ± 0.01) -B- 0.51 ± 0.08 (8x) (0.020 ± 0.003) 0.25 6.22 ± 0.25 (0.24 ± 0.01) -A- 5.0° ± 3° (10x) ...
Page 3
Package Dimensions (continued) Option X04 NOTE: THE -B- DATUM IS FORMED BY THE TWO HIGHEST POINTS OF THE COMBINED SURFACE FORMED BY THIS SURFACE AND THE CORRESPONDING SURFACE OF THE SAME LEAD ON THE OPPOSITE SIDE OF THE PACKAGE. *X ...
Page 4
Pinout Pin Description 1 Shutdown 2 No Connection 3 Supply Voltage 4 Receiver Data Output 5 Ground 6 Transmitter Data Input 7 LED Cathode 8 LED Anode Absolute Maximum Ratings Parameter Symbol Min. Storage Temperature T Operating Temperature T Lead ...
Page 5
Recommended Operating Conditions Parameter Symbol Operating Temperature T Supply Voltage V Logic High Transmitter V (TXD) IH Input Voltage Logic Low Transmitter V (TXD) IL Input Voltage Logic Low Shutdown V (SD) IL Input Voltage Logic High Shutdown V (SD) ...
Page 6
... The output low state is maintained for a duration dependent on the incident bit pattern and incident intensity (EI The E 3.6 W/cm condition guarantees the IrDA minimum receiver sensitivity of 4.0 W/cm I through a cosmetic window placed in front of the HSDL-1001. 5.5 V and and all typicals are Symbol Min ...
Page 7
Switching Specifications Specifications hold over 3 unless otherwise specified. Listed conditions represent worst case values for the parameters under test. Unspecified test conditions can be anywhere in their recommended operating range. Parameter Symbol Transmitter Optical ...
Page 8
Appendix A. Test Methods A.1. Background Light and Electromagnetic Field There are four ambient interference conditions in which the receiver is to operate correctly. The conditions are to be applied separately: 1. Electromagnetic field: 3 V/m maximum (refer to IEC ...