ATmega1280R212 Atmel Corporation, ATmega1280R212 Datasheet - Page 29

• Manufacturer Part Number: ATmega1280R212
• Manufacturer: Atmel Corporation

Specifications of ATmega1280R212

• Flash (kbytes): 128 Kbytes
• Max. Operating Frequency: 16 MHz
• Max I/o Pins: 86
• Spi: 5
• Twi (i2c): 1
• Uart: 4
• Adc Channels: 16
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Crypto Engine: AES
• Sram (kbytes): 8
• Eeprom (bytes): 4096
• Operating Voltage (vcc): 1.8 to 3.6
• Timers: 6
• Frequency Band: 700/800/900MHz
• Max Data Rate (mb/s): 1
• Antenna Diversity: No
• External Pa Control: Yes
• Power Output (dbm): 10
• Receiver Sensitivity (dbm): -110
• Receive Current Consumption (ma): 9.0
• Transmit Current Consumption (ma): 18 at 5dBm
• Link Budget (dbm): 120

11. Errata
11.1
11.2
11.3
2549NS–AVR–05/11
ATmega640 rev. B
ATmega640 rev. A
ATmega1280 rev. B
•
•
1.
2. High current consumption in sleep mode
Before entering sleep, interrupts not used to wake the part from the sleep mode should be
disabled.
•
•
1.
2. High current consumption in sleep mode
•
•
1.
Inaccurate ADC conversion in differential mode with 200× gain
High current consumption in sleep mode
Inaccurate ADC conversion in differential mode with 200× gain
High current consumption in sleep mode
Inaccurate ADC conversion in differential mode with 200× gain
High current consumption in sleep mode
With AVCC <3.6V, random conversions will be inaccurate. Typical absolute accuracy may
reach 64 LSB.
Problem Fix/Workaround
None.
If a pending interrupt cannot wake the part up from the selected sleep mode, the current
consumption will increase during sleep when executing the SLEEP instruction directly after
a SEI instruction.
Problem Fix/Workaround
With AVCC <3.6V, random conversions will be inaccurate. Typical absolute accuracy may
reach 64 LSB.
Problem Fix/Workaround
None.
If a pending interrupt cannot wake the part up from the selected sleep mode, the current
consumption will increase during sleep when executing the SLEEP instruction directly after
a SEI instruction.
Problem Fix/Workaround
Before entering sleep, interrupts not used to wake the part from the sleep mode should be
disabled.
With AVCC <3.6V, random conversions will be inaccurate. Typical absolute accuracy may
reach 64 LSB.
Inaccurate ADC conversion in differential mode with 200× gain
Inaccurate ADC conversion in differential mode with 200× gain
Inaccurate ADC conversion in differential mode with 200× gain
ATmega640/1280/1281/2560/2561
29