ATmega88PA Automotive Atmel Corporation, ATmega88PA Automotive Datasheet - Page 137

no-image

ATmega88PA Automotive

Manufacturer Part Number
ATmega88PA Automotive
Description
Manufacturer
Atmel Corporation
18. Analog-to-Digital Converter
18.1
18.2
7701E–AVR–02/11
Features
Overview
The Atmel
verter (ADC). The ADC is connected to 8-pin port A for external sources. In addition to
external sources, the internal temperature sensor can be measured by the ADC. The analog
multiplexer allows 8 single-ended channels or 12 differential channels from port A. The pro-
grammable gain stage provides amplification steps 0dB (1x) and 26dB (20x) for 12 differential
ADC channels.
The ADC contains a sample-and-hold circuit which ensures that the input voltage to the ADC
is held at a constant level during conversion. A block diagram of the ADC is shown in
18-1 on page
And internal reference voltage of nominally 1.1V is provided on chip. Alternatively, VCC can
be used as reference voltage for single-ended channels. There is also an option to use an
external voltage reference and turn off the internal voltage reference.
10-bit Resolution
1.0 LSB Integral Non-linearity
±2 LSB Absolute Accuracy
65 - 260µs Conversion Time
Up to 76kSPS at Maximum Resolution
Eight Multiplexed Single-Ended Input Channels
Twelve differential input channels with selectable gain (1x, 20x)
Temperature sensor input channel
Optional Left Adjustment for ADC Result Readout
0 - V
1.1V ADC Reference Voltage
Free-Running or Single-Conversion Mode
ADC Start Conversion by Auto Triggering on Interrupt Sources
Interrupt on ADC Conversion Complete
Sleep Mode Noise Canceller
Unipolar / Bipolar Input Mode
Input Polarity Reversal channels
CC
ADC Input Voltage Range
®
ATtiny24/44/84 features a 10-bit successive approximation analog-to-digital con-
138.
Atmel ATtiny24/44/84 [Preliminary]
Figure
137

Related parts for ATmega88PA Automotive