ADP5065 Analog Devices, ADP5065 Datasheet - Page 29

• Manufacturer Part Number: ADP5065
• Description: Fast Charge Battery Management with Power Path and USB Compatibility
• Manufacturer: Analog Devices

Specifications of ADP5065

• Product Description: Fast Charge Battery Management with Power Path and USB Compatibility
• Switching/linear: Switching
• Cell Type: Li-Ion
• Final Voltage Options: 4.2
• Accuracy Over Temp (%): 0.3%
• Temp Range: -40 to +125°C
• Package: WLCSP-20
• Active For Param Search: Yes

Data Sheet
Bit No.
[1:0]
Table 19. Charging Current, Register Address 0x04 Bit Descriptions
Bit No.
7
6
5
[4:2]
[1:0]
Table 20. Voltage Threshold, Register Address 0x05 Bit Descriptions
Bit No.
7
[6:5]
[4:3]
Mnemonic
IEND[1:0]
Mnemonic
C/20 EOC
C/10 EOC
Tied high in metal
ICHG[2:0]
ITRK_DEAD[1:0]
Mnemonic
Not used
VRCH[1:0]
VTRK_DEAD[1:0]
Access
R/W
Access
R/W
Access
R/W
R/W
R/W
R
R/W
R
R/W
Default
01 = 52.5 mA
Default
1
111 = 1250 mA
10 = 20 mA
Default
11 = 260 mV
01 = 2.5 V
Rev. A | Page 29 of 40
Description
Termination current programming bus. The values of the termination
current can be programmed as per the following values:
00 = 32.5 mA.
01 = 52.5 mA.
10 = 72.5 mA.
11 = 92.5 mA.
Description
The C/20 bit has priority over the other settings (C/10 EOC and IEND).
When this bit is set to high, C/20 programming is used. 27.5 mA
minimum value.
The C/10 bit has priority over the other setting (END) but not C/20
EOC.
When this bit is set to high, C/10 programming is used unless C/20
EOC is set to high. 27.5 mA minimum value.
Fast charge current programming bus. The values of the constant
current charge can be programmed as per the following values:
000 = 550 mA.
001 = 650 mA.
010 = 750 mA.
011 = 850 mA.
100 = 950 mA.
101 = 1050 mA.
110 = 1150 mA.
111 = 1250 mA.
Trickle and weak charge current programming bus. The values of the
trickle and weak charge currents can be programmed as per the
following values:
00 = 5 mA.
01 = 10 mA.
10 = 20 mA.
11 = 20 mA.
Description
Recharge voltage programming bus. The values of the recharge
threshold can be programmed as per the following values:
00 = 80 mV.
01 = 140 mV.
10 = 200 mV.
11 = 260 mV.
Trickle to fast charge dead battery voltage programming bus. The
values of the trickle to fast charge threshold can be programmed as
per following values:
00 = 2.4 V.
01 = 2.5 V.
10 = 2.6 V.
11 = 3.3 V.
ADP5065