TDA7405 STMicroelectronics, TDA7405 Datasheet - Page 21

• Manufacturer Part Number: TDA7405
• Description: IC PROCESSOR EQUALIZER 44-TQFP
• Manufacturer: STMicroelectronics
• Type: Car Signal Processorr

Specifications of TDA7405

• Mounting Type: Surface Mount
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -

5.10.3Characteristic
To achieve the desired compression characteristic like shown below the volume has to be decreased by 4dB.
Figure 22. Compander Characteristic
5.10.4I²C -BUS-Timing
When the Compander is active a volume- word coming from this stage is added to the I2C-Bus volume-word
and the volume is changed with a soft slope between adjacent steps (SoftStep-stage). As mentioned in the de-
scription of this stage it is not recommended to change the volume during this slope. To avoid this behaviour-
while the Compander is working, and the volume has to be changed, the compander-hold-bit is implemented
(Bit 7 in the subaddress-byte). The recommended timing for changing the volume during compander-ON is the
following:
1. Set the compander-hold-bit
2. Wait the actual SoftStep-time
3. Change the volume
4. Reset the compander-hold-bit
The SoftStep-times are in compander-ON condition automatically adapted to the attack-time of the Compander.
In the following table the related SoftStep-times are shown:
5.10.5AC-Coupling
In some applications additional signal manipulations are desired, for example surround-sound or more-band-
equalizing. For this purpose an AC-Coupling is placed before the speaker-attenuators, which can be activated
or internally shorted by I²C-Bus. In short condition the input-signal of the speaker-attenuator is available at the
AC-Outputs. The input-impedance of this AC-Inputs is 50k .
Output Level
dB
-10
-20
-30
-40
-50
-60
0
0
Attack-Time
12ms
24ms
48ms
6ms
-10
-8dB
-20
Input Level
2:1
SoftStep-Time
-30
0.16ms
0.32ms
0.64ms
1.28ms
-40
-38dB
15dB
-50
dB
-60
TDA7405
21/57