TDA7502 STMicroelectronics, TDA7502 Datasheet - Page 18

• Manufacturer Part Number: TDA7502
• Description: IC DSP IN-CAR REMOTE AMP 44-LQFP
• Manufacturer: STMicroelectronics
• Type: Audio Processorr

Specifications of TDA7502

• Applications: Automotive Systems
• Mounting Type: Surface Mount
• Package / Case: 44-LQFP
• Device Core Size: 24b
• Format: Fixed Point
• Clock Freq (max): 50MHz
• Mips: 50
• Device Input Clock Speed: 50MHz
• Ram Size: 6KB
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 3.15V
• Operating Supply Voltage (max): 3.45V
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 44
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Functional description
6.2
6.3
6.3.1
6.3.2
6.3.3
6.3.4
18/25
DSP peripherals
There are a number of peripherals that are tightly coupled to the DSP Core. Each of the
peripherals are listed below and described in the following sections.
●
●
●
●
●
●
●
●
Data and program memory
Each of the memories are described below.
1024 x 24-Bit X-RAM (XRAM)
This is a 1024 x 24-Bit single port SRAM used for storing coefficients. The 16-Bit XRAM
address, XABx(15:0) is generated by the address generation unit of the DSP core. The 24-
Bit XRAM Data, XDBx(23:0), may be written to and read from the data ALU of the DSP core.
The XDBx Bus is also connected to the internal bus switch so that it can be routed to and
from all peripheral blocks.
1024 x 24 Bit Y-RAM (YRAM)
This is a 1024 x 24-Bit single port SRAM used for storing coefficients. The 16-Bit address,
YABx(15:0) is generated by the address generation unit of the DSP core. The 24-Bit Data,
YDBx(23:0), is written to and read from the Data ALU of the DSP core. The YDBx Bus is
also connected to the internal bus switch so that it can be routed to and from other blocks.
3072 X 24-Bit Program RAM
This is a 3072 x 24-Bit single port SRAM used for storing and executing program code. The
16-Bit PRAM Address, PABx(15:0) is generated by the program address generator of the
DSP core for instruction fetching, and by the AGU in the case of the move program memory
(MOVEM) instruction. The 24-Bit PRAM Data (program code), PDBx(23:0), can only be
written to using the MOVEM instruction.
During instruction fetching the PDBx bus is routed to the program decode controller of the
DSP core for instruction decoding.
Spare space in the program area may be used as data memory to implement delay lines for
example.
512 x 24-Bit Bootstrap ROM (Boot ROM)
This is a 512 x 24-Bit factory programmed Boot ROM used for storing the program
sequence for initializing the DSP.
1024 x 24-Bit X-RAM.
1024 x 24-Bit Y-RAM.
3072 x 24-Bit program RAM.
512 x 24-Bit Boot ROM.
Serial audio interface (SAI).
Programmable control interface (SPI/I
GPIO.
PLL clock oscillator.
2
C).
TDA7502