2-316131-3 TE Connectivity, 2-316131-3 Datasheet

2-316131-3

Manufacturer Part Number
2-316131-3
Description
Manufacturer
TE Connectivity
Datasheets

Specifications of 2-316131-3

Product Type
Connector
Connector Type
Header
Mount
Board Mount
Keyed
Yes
Product Series
D-3200S
Pcb Mounting Orientation
Right Angle
Pcb Mount Style
Through Hole
Pcb Mount Retention
With
Keying
Y
Voltage Rating (vac)
600
Termination End Plating
Gold over Nickel
Number Of Positions
6
Number Of Rows
1
Centerline, Matrix (mm [in])
5.08 [.200]
Pcb Mount Retention Type
Boardlock(s)
Contact Type
Pin
Contact Plating, Mating Area, Material
Gold (30)
Contact Base Material
Copper Alloy
Connector Style
Plug
Housing Material
Nylon
Ul Flammability Rating
UL 94V-0
Housing Color
Black
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
Rohs/elv Compliance History
Converted to comply with RoHS directive
Applies To
Printed Circuit Board
Packaging Quantity
12
Packaging Method
Tube
2. 2.2 民間団体規格
1.適用範囲
1.1 内容
本規格はダイナミックコネクタD-3000シリー
ズの製品性能、試験方法、品質保証の必要条件を規
定している。適用製品群はFig.1の通りである。
2. 参考規格類
2.1 TE 規格
3.一般必要条件
3.1 設計と構造
製品は該当製品図面に規定された設計、構造、物理的
寸法をもって製造されていること。
タイコ エレクトロニクスジャパン合同会社 (〒213-8535 川崎市高津区久本 3-5-8)
* : 商標
以下規格類は本規格中で規定する範囲内に於いて、
本規格の一部を構成する。万一本規格と製品図面の
間に不一致が生じた時は、製品図面を優先して適用
すること。万一本規格と参考規格類の間に不一致が
生じた時は、本規格を優先して適用すること。
A. 114-5148
B. 501-5013, 501-78324
A. MIL-STD-202 : 電子電気部品の試験方法
B. EIA-364 : 電気コネクタの試験方法
: 取付適用規格
: 認定試験報告書
D-3000 シリーズ/D-3000 SERIES
Product Specification
製品群/Description
製品規格
Fig.1
1. Scope :
1.1 Contents
This specification covers the requirements for
product performance, test methods and quality
assurance provisions of D-3000 Series.
Applicable product description are as shown in
Fig.1
2. Applicable Documents :
The following documents form a part of this
specification to the extent specified herein.
In the event of conflict between the requirements
of this specification and the product drawing,
the product drawing shall take precedence.
In the event of conflict between the requirements
of this specification and the referenced
documents, this specification shall take
precedence.
2.1 TE Specifications :
2.2 Commercial Standards and Specifications :
3. Requirements:
3.1 Design and Construction :
A. 114-5148 : Application Specification
B. 501-5013, 501-78324 : Qualification Test Report
B. EIA-364 : Electrical Connector / Socket Test
A. MIL-STD-202 : Test Methods for Electronic and
Product shall be of the design, construction
and physical dimensions specified on the
applicable product drawing.
Procedures Including Enveronmental
Classifications
ダイナミックコネクタ
Electrical Component Parts
108-5349
1 of 12
シリーズ

Related parts for 2-316131-3

2-316131-3 Summary of contents

Page 1

... TE Specifications : A. 114-5148 : Application Specification B. 501-5013, 501-78324 : Qualification Test Report 2.2 Commercial Standards and Specifications : A. MIL-STD-202 : Test Methods for Electronic and B. EIA-364 : Electrical Connector / Socket Test Procedures Including Enveronmental Classifications 3. Requirements: 3.1 Design and Construction : Product shall be of the design, construction and physical dimensions specified on the applicable product drawing ...

Page 2

... UL 94V-0 C.Accessories and Hardware(Retention leg): (1) Material : Copper alloy (2) Finish 3.3 Ratings : A.Voltage Rating : B.Current Rating : Refer to Fig.2 and 5 for C. Temperature Rating :-55℃ ~ +105℃ 電 線 サ イ ズ #18 #20 #22 12 ...

Page 3

... Visual inspection drawing and TE Specification No physical damage 114- 5148 電 気 的 性 能 Electrical Requirements 5 mΩ 以下(初期) ハウジングに組み込まれ嵌合したコンタ ...

Page 4

... Requirements 機 械 的 性 能 Mechanical Requirements 49 N 以上 コンタクト引抜力を軸方向に加えること。 (圧着タイプのみ) 操 ...

Page 5

... Measure the force required to insert Per 1 contact contact into housing. 振動中1μs. をこえる不連続導 振動周波数 : 10~500Hz / 15 min 通を生じないこと。 加速度 振動方向 ...

Page 6

... EIA364-52 MIL-STD-202 試験法208 Wet Solder Coverage : Solder Temperature : ...

Page 7

... Termination Resistance Mated/Unmated connector (Low Level) -55° min.,+85° min. Making this a cycle, repeat 25 cycles. EIA364-32 MIL-STD-202 Method 107 Condition A-1 試験後、絶縁抵抗、耐電圧及び 嵌合したコネクタ25~65°C, 総 ...

Page 8

... EIA364-31B Test Condition A MIL-STD-202 Method 103 Condition B 試験後、総合抵抗(ローレベル) 嵌合したコネクタ の条件に合致すること。 ...

Page 9

... Rev. J5 Product Specification 製品規格 Fig.4 Fig.5 108-5349 ...

Page 10

... Temperature Life 塩水噴霧 Salt Spray (a) 欄内の数字は試験の順序を示す。/Numbers indicate sequence in which the tests are performed. Rev. J5 Product Specification 製品規格 ...

Page 11

... Pressure 4.2 製品再認定試験 もし製品に、形状、組合せや嵌合、又は機能に ...

Page 12

... Testing to confirm corrective action is required before resubmittal. 4.4 Quality Conformance Inspection: The applicable quality inspection plan will specify the sampling acceptable quality level to be used. Dimensional and functional requirements shall be in accordance with the applicable product drawing and this specification. 108-5349 ...

Related keywords