5-860245-1 TE Connectivity, 5-860245-1 Datasheet - Page 5

5-860245-1

Manufacturer Part Number
5-860245-1
Description
Manufacturer
TE Connectivity
Datasheet

Specifications of 5-860245-1

Product Type
Flying Lead Assembly
Product Style
Cable Assembly
Shape
Circular
Prewired
Yes
Mount Angle
Straight
Wire Size (mm² [awg])
0.5-0.6² [20]
Flange
With
Operating Voltage (kvdc)
15
Shielded
No
Number Of Positions
7
Mount Type
Bulkhead
Boot
Without
Lead Assembly Type
Connector with flying leads.
Assembly Length (mm [in])
304.80 [12.000]
Wire Insulation
Silicone
Connector Style
Receptacle
Housing Material
Epoxy
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
4.
4.1.
4.2.
4.3.
4.4.
Rev O2
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form , fit or function are m ade to the product or m anufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determ ined by developm ent/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product m eets the requirem ents of Figure 1. Failures
attributed to equipm ent, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specim ens resubm itted for qualification. Testing to
confirm corrective action is required before resubm ittal.
Quality Conform ance Inspection
The applicable quality inspection plan shall specify the sam pling acceptable quality level to be used.
Dim ensional and functional requirem ents shall be in accordance with the applicable product drawing
and this specification.
Specim en Selection
Specim ens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. Test group 1 shall consist of 28 lead assem blies and
receptacles; 4 each from 1/2I, 1/2LI, LI, 1LI, 2I, 3I and 4I series. Test group 2 shall consist of 14
herm etic seal type receptacles; 2 each from 1/2I, 1/2LI, LI, 1LI, 2I, 3I and 4I series.
Test Sequence
Qualification inspection shall be verified by testing specim ens as specified in Figure 2.
108-36033
5 of 6

Related parts for 5-860245-1