1-280050-2 TE Connectivity, 1-280050-2 Datasheet - Page 42

• Manufacturer Part Number: 1-280050-2
• Manufacturer: TE Connectivity

Specifications of 1-280050-2

• Product Type: Terminal
• Terminal Type: Receptacle
• Mating Area Interface Dimensions (mm [in]): 6.35 x 0.81 [.250 x .032]
• Receptacle Style: Flag
• Insulation Support: Insulation Support
• Wire/cable Type: Stranded
• Insulation Diameter (mm [in]): 2.36-3.30 [.093-.130]
• Insertion Force: Normal
• Finish: Tin
• Crimp Type: F-Crimp
• Board Mount: No
• Weld Tab: Without
• Wire Range (mm [awg]): 0.50-1.50² [20-15]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

2042
Entry Level Semi-Automatic
IDC Bench Machines
SIM 500P
Part No. 528376-2
SIM 500T
Part No. 528377-2
SIM 500P
Technical Features
Products for Industrial &
Commercial Applications
Processing of all versions of
the AMP multifitting Mark II
connector system with only
minor set up changes.
Cutting and reliable removal
of the reel clips.
Cutting and reliable removal
of the coding and
polarisation ribs by means of
a preset cutting block.
Nest capacity
per machine cycle
– one connector 4- to 8-pos.
– two connectors 2- and
– four connectors 1-position
Integrated monitoring of the
connector supply.
Simple operator interface.
3-pos.
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
In the Entry Level concept, the
application process is shared by
two different semi-automatic
machines.
The SIM 500P prepares the
AMP multifitting Mark II bando-
liered IDC connectors. The
machine removes the connector
from the chain and cuts the
keying ribs.
Technical Data
Power Supply:
230 V AC, 50 Hz
Air Pressure:
6 bar
Cycle Time:
approx. 4 s / connector package
(without handling time)
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
Application Tooling
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
SIM 500T
Next, the prepared IDC
connectors are applied by the
SIM 500T.
To facilitate this, the individual
IDC connectors are loaded into
a nest and moved automatically
into the termination station.
The manually inserted wires
are, according to a program,
Technical Features
Application of all versions of
the AMP multifitting Mark II
connector, with only minor
set up changes.
Termination of the wire with
active support of the IDC
contact.
Termination of two wires
(double wire termination)
programmable.
Connector fixture,
incorporating three nests for
max. 12 positions each.
Accessible and easily
interchangeable mechanical
program rail.
By utilising several
connector fixtures and
program rails, output and set
up times can be optimised.
Simple operator interface.
Specifications subject to
change.
Dimensions are
millimetres over inches
METRIC
terminated into the appropriate
insulation displacement slots.
The cover is then separated
from the housing, turned and
pushed into final position.
The nest, including the finished
harness module, is removed
from the easily accessed track.
Technical Data
Power Supply:
230 V AC, 50 Hz
Air Pressure:
6 bar
Cycle Time:
approx. 1.2 s / line
(without handling time)
www.tycoelectronics.com
Catalogue 1654742
Revised 5-04