1-1627171-2 TE Connectivity, 1-1627171-2 Datasheet

1-1627171-2

Manufacturer Part Number
1-1627171-2
Description
Manufacturer
TE Connectivity
Datasheets

Specifications of 1-1627171-2

Terminal Shape
Ring Tongue
Receptacle Style
Straight
Barrel Type
Open Barrel
Wire/cable Type
Regular Wire
Insulation
No
Insulation Support
Insulation Support
Insulation Diameter (mm [in])
3.00 [.118] Max.
Stud Diameter (mm [in])
5.00 [0.197]
Stud Size
None
Shape
RING-029
Heavy Duty
No
Finish
Pre-Tin
Wire Range (mm [awg])
0.40-1.50² [21-15]
Stock Thickness (mm [in])
0.50 [0.019]
Government/industry Qualification
No
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Packaging Method
Strip
1.
2.
2.1.
2.2.
2.3.
2.4.
2.5.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
This specification covers the crimp requirements for extruded ring terminals.
CRIMP REQUIREMENTS
Figure 1 illustrates the various features defined in the following paragraphs.
Tab on back end of terminals shall be .020 maximum.
Bellmouth at back of wire barrel shall be .005 to .030.
Wire shall lay flat and must extend through wire barrel with no more than 3/64 inch maximum overhang.
Crimp heights and crimp width of the wire barrel and crimp width of the insulation barrel are shown in
the following table:
TE PN
40894
Product
Specification
Crimping Extruded Ring Terminals
| Indicates Change
*Trademark
Wire Size
Other products, logos, and company names might be trademarks of their respective owners.
For latest revision, visit out website at www.te.com/documents
For Regional Customer service, visit our website at www.te.com
18
20
Figure 1
Wire Barrel
Table 1
Height ±
Crimp
.002
.056
.053
Crimp Width
.110 “F”
Crimp Width
Insulation
.140 “F”
Barrel
108-16001
11 Mar 11 Rev A
1 of 1
LOC B

Related parts for 1-1627171-2

Related keywords