MAX989 Maxim, MAX989 Datasheet
MAX989
Available stocks
Related parts for MAX989
MAX989 Summary of contents
Page 1
... The single MAX985 is available in a chip-scale pack- age (UCSP™), significantly reducing the required PC board area. The single MAX985/MAX986 are available in 5-pin SC70 packages and the dual MAX989/MAX990 are available in 8-pin SOT23 packages. Selector Guide COMPARATORS PART ...
Page 2
... V ) ................................................... Current into Input Pins ......................................................±20mA IN_-, IN_ .......................................-0. OUT_ MAX985/MAX989/MAX993 ....................-0. MAX986/MAX990/MAX994.....................................-0. OUT_ Short-Circuit Duration Continuous Power Dissipation (T = +70°C) A 5-Pin SC70 (derate 3.1mW/°C above +70°C) ...............247mW 5-Pin SOT23 (derate 7.10mW/°C above +70°C)...........571mW 6-Bump UCSP (derate 3.9mW/° ...
Page 3
... MAX985/MAX989/ MAX993 only 100mV overdrive C = 15pF L MAX986/MAX990/ 10mV overdrive MAX994 only 5.1kΩ 100mV overdrive PULLUP 10mV overdrive MAX985/MAX989/ MAX993 only 15pF 100mV overdrive L = +25°C. Limits over the extended temperature range are guar +25°C.) (Note 1) A MIN TYP ...
Page 4
Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators __________________________________________Typical Operating Characteristics ( +25°C, unless otherwise noted SUPPLY CURRENT vs. TEMPERATURE 18 V > V IN+ IN ...
Page 5
... V = 2.7V CC 400 300 V = 5.0V CC 200 100 120 160 200 INPUT OVERDRIVE (mV) MAX985/MAX989/MAX993 ) SWITCHING CURRENT, OUT RISING MAX985-12 IN+ 50mV/ div OUT 2V/div 50mV OD 100ns/div POWER-UP DELAY MAX985-15 50mV div 2V/div OUT 5µs/div ...
Page 6
... Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators PIN MAX985 MAX989 MAX986 MAX990 SOT23/ SO/µMAX/ SO UCSP* SC70 — — — — — — — — — — — — — — — — — — — ...
Page 7
... Unfortunately, this method also slows hysteresis response time. Use the following procedure to calcu- late resistor values for the MAX985/MAX989/MAX993. 1) Select R3. Leakage current under 10nA, so the current through R3 should be at least 1µA to minimize errors caused by leakage current. The cur- rent through R3 at the trip point ...
Page 8
... V THR THF MAX986/MAX990/MAX994 The MAX986/MAX990/MAX994 have ±3mV internal hysteresis. They have open-drain outputs and require an external pullup resistor (Figure 2). Additional hys- teresis can be generated using positive feedback, but the formulas differ slightly from those of the MAX985/MAX989/MAX993 ...
Page 9
... PCB techniques, P-P bump-pad layout, and recommended reflow tempera- ture profile, as well as the latest information on reliability testing results, refer to the Application Note: UCSP—A Wafer-Level Chip-Scale Package on Maxim’s web site at www.maxim-ic.com/ucsp. 100kΩ OUT 1 100kΩ ...
Page 10
... MAX993EUD MAX993ESD MAX994EUD MAX994ESD Note: All devices are specified over the -40°C to +85°C operating temperature range. Pin Configurations (continued N.C. OUTA INA MAX985 MAX989 MAX986 MAX990 3 6 OUT 3 INA N. SO/µMAX/SOT23 TOP PKG PIN-PACKAGE MARK ...
Page 11
... Micropower, Low-Voltage, UCSP/SC70, (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information www.maxim-ic.com/packages.) ______________________________________________________________________________________ Rail-to-Rail I/O Comparators Package Information 11 ...
Page 12
... Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information www.maxim-ic.com/packages.) 12 ______________________________________________________________________________________ Package Information (continued) PACKAGE OUTLINE, 3x2 UCSP 21-0097 ...
Page 13
... FRONT VIEW Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600___________________ 13 © ...