QUAD DIFFERENTIAL COMPARATOR
QML-V Qualified, SMD 5962-7700801VCA,
5962-9673802VCA and 5962-9673802V9B
Rad-Tolerant: 40 kRad/sec (Si) TID
(5962-9673802VCA and 5962-9673802V9B)
– TID Dose Rate = 0.01 rad/sec (Si)
Wide Supply Ranges
– Single Supply: 2 V to 36 V
(Tested to 30 V)
– Dual Supplies: ±1 V to ±18 V
(Tested to ±15 V)
Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA (Typ)
Low Input Bias Current: 25 nA (Typ)
Low Input Offset Current: 3 nA (Typ) (LM139)
Low Input Offset Voltage: 2 mV (Typ)
(1) Radiation tolerance is a typical value based upon initial device
qualification with dose rate = 0.01 rad/sec. Radiation lot
acceptance testing is available - contact factory for details.
These devices consist of four independent voltage comparators that are designed to operate from a single power
supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference
between the two supplies is 2 V to 36 V, and V
voltage. Current drain is independent of the supply voltage. The outputs can be connected to other
open-collector outputs to achieve wired-AND relationships.
The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to
–55°C to 125°C
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(3) Radiation tolerant
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Check for Samples: LM139-SP,
Common-Mode Input Voltage Range Includes
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: ±36 V
Low Output Saturation Voltage
Output Compatible With TTL, MOS, and CMOS
is at least 1.5 V more positive than the input common-mode
Table 1. ORDERING INFORMATION
ORDERABLE PART NUMBER
SCLS720C – NOVEMBER 2010 – REVISED MARCH 2011
© 2010–2011, Texas Instruments Incorporated