PM5381-BI PMC-Sierra, Inc., PM5381-BI Datasheet - Page 285

• Manufacturer Part Number: PM5381-BI
• Description: ATM UNI, Single Channel ATM PHY Interface for 2488.32Mbps
• Manufacturer: PMC-Sierra, Inc.

Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-2000489, Issue 4
COPERDII
PBIPEI
PREIEI
The change of path enhanced remote defect indication interrupt status (COPERDII) bit is an
event indicator. COPERDII is set to logic 1 to indicate a new ERDI-P value. The interrupt
status bit is independent of the interrupt enable bit. If WCIMODE is set to logic 1, only over-
writing with a ‘1’ clears this bit. If WCIMODE is set to logic 0, then a read of this register
automatically clears the bit.
The path BIP-8 error interrupt status (PBIPEI) bit is an event indicator. PBIPEI is set to logic
1 to indicate a path BIP-8 error. The interrupt status bit is independent of the interrupt enable
bit. If WCIMODE is set to logic 1, only over-writing with a ‘1’ clears this bit. If WCIMODE
is set to logic 0, then a read of this register automatically clears the bit.
The path REI error interrupt status (PREIEI) bit is an event indicator. PREIEI is set to logic 1
to indicate a path REI error. The interrupt status bit is independent of the interrupt enable bit.
If WCIMODE is set to logic 1, only over-writing with a ‘1’ clears this bit. If WCIMODE is
set to logic 0, then a read of this register automatically clears the bit.
S/UNI-2488 Telecom Standard Product Datasheet
Released
285