PM4328-PI PMC-Sierra, Inc., PM4328-PI Datasheet - Page 75

• Manufacturer Part Number: PM4328-PI
• Description: Framer, T1|E1|T3 Standard Format, 324-BGA
• Manufacturer: PMC-Sierra, Inc.

STANDARD PRODUCT
DATASHEET
PMC-2011596
9.3 Performance Monitor Counters (T1/E1-PMON)
PROPRIETARY AND CONFIDENTIAL
corresponding register values are updated upon generation of the CRC
submultiframe interrupt.
This E1-FRMR also detects the V5.2 link ID signal, which is detected when 2 out
of 3 Sa7 bits are zeros. Upon reception of this Link ID signal, the V52LINKV bit
of the E1-FRMR Framing Status register is set to logic 1. This bit is cleared to
logic 0 when 2 out of 3 Sa7 bits are ones.
Alarm Integration
The OOF and the AIS defects are integrated, verifying that each condition has
persisted for 104 ms (± 6 ms) before indicating the alarm condition. The alarm is
removed when the condition has been absent for 104 ms (± 6 ms).
The AIS alarm algorithm accumulates the occurrences of AISD (AIS detection).
The E1-FRMR counts the occurrences of AISD over a 4 ms interval and
indicates a valid AIS is present when 13 or more AISD indications (of a possible
16) have been received. Each interval with a valid AIS presence indication
increments an interval counter which declares AIS Alarm when 25 valid intervals
have been accumulated. An interval with no valid AIS presence indication
decrements the interval counter. The AIS Alarm declaration is removed when the
counter reaches 0. This algorithm provides a 99.8% probability of declaring an
AIS Alarm within 104 ms in the presence of a 10
The Red alarm algorithm monitors occurrences of OOF over a 4 ms interval,
indicating a valid OOF interval when one or more OOF indications occurred
during the interval, and indicating a valid in frame (INF) interval when no OOF
indication occurred for the entire interval. Each interval with a valid OOF
indication increments an interval counter which declares Red Alarm when 25
valid intervals have been accumulated. An interval with valid INF indication
decrements the interval counter; the Red Alarm declaration is removed when the
counter reaches 0. This algorithm biases OOF occurrences, leading to
declaration of Red alarm when intermittent loss of frame alignment occurs.
The E1-FRMR can also be disabled to allow reception of unframed data.
The Performance Monitor Counters function is provided by the PMON block.
The block accumulates CRC error events, Frame Synchronization bit error
events, and Out Of Frame events, or optionally, Change of Frame Alignment
(COFA) events with saturating counters over consecutive intervals as defined by
the period of the supplied transfer clock signal (typically 1 second). When the
transfer clock signal is applied, the PMON transfers the counter values into
ISSUE 1
62
-3
mean bit error rate.
HIGH DENSITY T1/E1 FRAMER
AND M13 MULTIPLEXER
PM4328 TECT3