LEDRS75N

Manufacturer Part NumberLEDRS75N
DescriptionLED Highly-Diffused Lights
ManufacturerBanner
LEDRS75N datasheet
 


1
Page 1
2
Page 2
Page 1/2

Download datasheet (71Kb)Embed
Next
www.DataSheet4U.com
Illumination
Models
LEDRS75N
Continuous
highly-diffused
light
LEDGS75N
Strobed
LEDRS75N-S
highly-diffused
light
These models are not stocked and are non-returnable.
Useful Life
Environmental Rating
Operating Conditions
25.8 mm
(1.02")
12.7 mm
(0.50")
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Printed in USA
LED Highly-Diffused Lights (75 mm)
• Designed to minimize surface textures and elevation changes, while providing
uniform illumination over the field of view
• 59 mm x 75 mm light aperture
• The suggested field of view is 38 mm in diameter and the suggested stand off is 25 mm
• Black anodized aluminum housing
LED Highly-Diffused Light Models
Type
Color
Cable
0.5 m (18")
Red 640 nm
terminated
with 9-pin
D-sub
connector
(male pins)
Green 530 nm
1.8 m (6')
terminated
with 9-pin
Red 640 nm
D-sub
connector
(male pins)
Green model: 50,000 hours; Red models: 60,000 hours.
Note: actual useful life of strobed lights depends on duty cycle
IEC IP20; NEMA 1
Temperature: 0° to 40°C (+32° to 104°F)
Maximum relative humidity: 95% at 40°C (non-condensing)
82.6 mm
75 mm
(3.25")
(2.95")
Light Aperture
75 mm
(2.95")
25.4 mm
Light Aperture
(1.00")
25.4 mm
138.4 mm
12.7 mm
(1.00")
(0.50")
25.4 mm
(1.00")
77.0 mm
(3.03)
M6 x 1.0
6.4 (0.25") DEEP (4x)
05/01
Features
Supply
Supply
Voltage
Current
980 mA max.
12V dc ±10%
with voltage
regulation of ±1%
1.0 A max.
24V dc ±10%
7.0 A max.
with voltage
1 ms pulse
regulation of ±1%
See
(5.45")
Table
Connections
Pin 1 = +V fan
Pin 2 = dc common fan
Pin 3 = dc common
Pin 4 = +V
Power supply model
PSA-12(E) or
PS2V-12(E)
is recommended
(see other side)
Pin 4 or 5 = +V
Pin 1 or 6 = dc common
Use strobe control
module model SCM
(see other side)
P/N 67442

LEDRS75N Summary of contents

  • Page 1

    ... Illumination Models LEDRS75N † Continuous highly-diffused light LEDGS75N † Strobed LEDRS75N-S highly-diffused † light † These models are not stocked and are non-returnable. Useful Life Environmental Rating Operating Conditions 25.8 mm (1.02") 12.7 mm (0.50") WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period ...

  • Page 2

    ... A nominal per channel @ 60 Hz Extension Cables Configuration Used with Continuous types: LEDRS75N LEDGS75N SCM Strobe Control Module (see below) Used with Continuous types: LEDRS75N LEDGS75N Output Used with Strobed types: LEDRS75N-S Used with Continuous types: LEDRS75N LEDGS75N Strobed types: LEDRS75N-S ...