MT29F8G08FABWP Micron Technology, Inc, MT29F8G08FABWP Datasheet - Page 27

• Manufacturer Part Number: MT29F8G08FABWP
• Manufacturer: Micron Technology, Inc

READ ID 90h
Figure 20:
09005aef818a56a7 pdf/ 09005aef81590bdd source
2gb_nand_m29b__2.fm - Rev. H 9/05 EN
READ ID Operation
Notes: 1. See Table 8 on page 28.
The READ ID command is used to read the 4 bytes of identifier codes programmed into
the devices. The READ ID command reads a 4-byte table that includes Manufacturer’s
ID, device configuration, and part-specific information. See Table 8 on page 28, which
shows complete listings of all configuration details.
Writing 90h to the command register puts the device into the read ID mode. The com-
mand register stays in this mode until another valid command is issued. (See Figure 20.)
WE#
ALE
I/Ox
CE#
RE#
CLE
90h
2, 4, and 8Gb x8/x16 Multiplexed NAND Flash Memory
Address, 1 Cycle
00h
27
t WHR
t AR
Micron Technology, Inc., reserves the right to change products or specifications without notice.
t REA
Manufacturer
Byte 0
ID
1
Device
Byte 1
ID
1
Command Definitions
©2004 Micron Technology, Inc. All rights reserved.
Don't Care
Byte 2
Byte 3
1