DS1013 Dallas Semiconducotr, DS1013 Datasheet - Page 5

• Manufacturer Part Number: DS1013
• Description: 3-in-1 Silicon Delay Line
• Manufacturer: Dallas Semiconducotr

NOTES:
1. All voltages are referenced to ground.
2. Measured with outputs open.
3. V
4. See “Test Conditions” section.
5. The combination of temperature variations from 25°C to 0°C or 25°C to 70°C and voltage variations
6. All output delays tend to vary unidirectionally over temperature or voltage ranges (i.e., if OUT 1
7. Period specifications may be exceeded; however, accuracy will be application-sensitive (decoupling,
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading edge of the
following pulse.
t
1.5V point on the trailing edge, or the 1.5V point on the trailing edge and the 1.5V point on the leading
edge.
t
input pulse.
t
input pulse.
t
pulse and the 1.5V point on the leading edge of any tap output pulse.
t
pulse and the 1.5V point on the trailing edge of any tap output pulse.
WI
RISE
FALL
PLH
PHL
for -70 to 100 and ±5% for -150 and longer delays.
from 5.0V to 4.75V or 5.0V to 5.25V may produce an additional delay shift of ±1.5 ns or ±3%,
whichever is greater.
slows down, all other outputs also slow down).
layout, etc.).
(Pulse Width): The elapsed time on the pulse between the 1.5V point on the leading edge and the
(Time Delay, Falling): The elapsed time between the 1.5V point on the trailing edge of the input
(Time Delay, Rising): The elapsed time between the 1.5V point on the leading edge of the input
(Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the
CC
(Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge of the
= 5V @ 25°C. Delays accurate on both rising and falling edges within ±2 ns for -10 to -60, ±3%
5 of 6
DS1013