tda8031hl-c107 NXP Semiconductors, tda8031hl-c107 Datasheet - Page 15

no-image

tda8031hl-c107

Manufacturer Part Number
tda8031hl-c107
Description
Usb Smart Card Reader Otp Or Rom
Manufacturer
NXP Semiconductors
Datasheet
Philips Semiconductors
8.1.3.2
The Hardware Status Register (HSR) gives the status of the chip after a hardware problem has been detected.
Table 2 Hardware Status Register (address 0FH; read only); note 1
Note
1. All bits are cleared after reset.
Table 3 Description of the HSR bits
When either bits PRTL, PRL or PTL is logic 1, then pin INT0 is LOW. The bits having caused the interrupt are cleared
when the HSR has been readout (2
At power-on, or after a supply voltage drop-out, SUPL is set and INT0 is LOW. INT0 will return HIGH at the end of the
internal Power-on reset pulse defined by the value of the capacitor connected to pin CDELAY. SUPL will be reset only
after a status register readout outside the Power-on reset pulse; see Fig.8.
In the event of emergency deactivation (by PRTL, SUPL, PRL and PTL), bit START will be automatically reset by
hardware.
8.1.3.3
The three Time-Out Registers TOR1, TOR2 and TOR3 form a programmable 24-bit ETU counter, or two independant
counters (one 16-bit and one 8-bit).
The value to load in TOR1, TOR2 and TOR3 is the number of ETUs to count.
Table 4 Time-out register 1 (address 09H; write only); note 1
Note
1. All bits are cleared after reset.
2003 Jul 04
USB smart card reader (OTP or ROM)
7 and 6
TOL7
BIT
7
5
4
3
2
1
0
7
Hardware status register
Time-out registers
SYMBOL
PRTL
SUPL
TOL6
PRL
PTL
6
6
not used
Protection 1: Bit PRTL = 1 when a default has been detected on card reader. Bit PRTL
is the OR function of the protection on pins V
Supervisor Latch: Bit SUPL = 1 when the supervisor has been activated.
not used
Presence Latch: Bit PRL = 1 when a change has occurred on pin PRES.
not used
Overheating: Bit PTL = 1 if overheating has occurred.
PRTL
TOL5
5
5
f
int
cycles after the rising edge of RD).
SUPL
TOL4
4
4
15
TOL3
3
3
DESCRIPTION
CC
and RST.
TOL2
PRL
2
2
TDA8030; TDA8031
TOL1
1
1
Product specification
TOL0
PTL
0
0

Related parts for tda8031hl-c107