mc68hc708mp16 Freescale Semiconductor, Inc, mc68hc708mp16 Datasheet - Page 118

no-image

mc68hc708mp16

Manufacturer Part Number
mc68hc708mp16
Description
M68hc08 Microcontrollers
Manufacturer
Freescale Semiconductor, Inc
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
mc68hc708mp16CFU
Manufacturer:
FRE/MOT
Quantity:
20 000
Clock Generator Module (CGM)
Technical Data
118
NOTE:
PLLON — PLL On Bit
BCS — Base Clock Select Bit
PLLON and BCS have built-in protection that prevents the base clock
selector circuit from selecting the VCO clock as the source of the base
clock if the PLL is off. Therefore, PLLON cannot be cleared when BCS
is set, and BCS cannot be set when PLLON is clear. If the PLL is off
(PLLON = 0), selecting CGMVCLK requires two writes to the PLL control
register. (See
PCTL[3:0] — Unimplemented bits
This read/write bit activates the PLL and enables the VCO clock,
CGMVCLK. PLLON cannot be cleared if the VCO clock is driving the
base clock, CGMOUT (BCS = 1). (See
Circuit.) Reset sets this bit so that the loop can stabilize as the MCU
is powering up.
This read/write bit selects either the crystal oscillator output,
CGMXCLK, or the VCO clock, CGMVCLK, as the source of the CGM
output, CGMOUT. CGMOUT frequency is one-half the frequency of
the selected clock. BCS cannot be set while the PLLON bit is clear.
After toggling BCS, it may take up to three CGMXCLK and three
CGMVCLK cycles to complete the transition from one source clock to
the other. During the transition, CGMOUT is held in stasis. (See
Base Clock Selector
These bits provide no function and always read as logic 1s.
1 = PLL on
0 = PLL off
1 = CGMVCLK divided by two drives CGMOUT.
0 = CGMXCLK divided by two drives CGMOUT.
Clock Generator Module (CGM)
8.4.3 Base Clock Selector
Circuit.) Reset clears the BCS bit.
8.4.3 Base Clock Selector
Circuit.)
MC68HC708MP16
Freescale Semiconductor
Rev. 3.1
8.4.3

Related parts for mc68hc708mp16