mc68hc711k4 Freescale Semiconductor, Inc, mc68hc711k4 Datasheet - Page 207

• Manufacturer Part Number: mc68hc711k4
• Description: Hcmos Microcontroller Unit
• Manufacturer: Freescale Semiconductor, Inc

9.7.4 Timer Interrupt Mask 2 Register
M68HC11K Family
MOTOROLA
Address: $0024
Bits in TMSK2 correspond bit for bit with flag bits in TFLG2.
PAOVF — Pulse Accumulator Overflow Flag
PAOVI — Interrupt Enable Bit
PAIF — Pulse Accumulator Input Edge Flag
PAII — Interrupt Enable Bit
Reset:
Read:
Write:
The PAOVF status bit is set each time the pulse accumulator count
rolls over from $FF to $00.
If PAOVI is set, an interrupt request is also generated. If PAOVI is
cleared, pulse accumulator overflow interrupts are inhibited, and
PAOVF must be polled by user software to determine when an
overflow has occurred. In either case, software must clear PAOVF by
writing a 1 to bit 5 in the TFLG2 register.
The PAIF status bit is automatically set each time a selected edge is
detected at the PA7 pin.
If PAII is set, an interrupt request is also generated. If PAII is cleared,
pulse accumulator input interrupts are inhibited, and PAIF must be
polled by user software to determine when an input edge has been
detected. In either case, software must clear PAIF by writing a 1 to
bit 5 in the TFLG2 register.
Freescale Semiconductor, Inc.
For More Information On This Product,
Bit 7
TOI
0
Figure 9-25. Timer Interrupt Mask 2 (TMSK2)
Go to: www.freescale.com
RTII
Timing System
6
0
PAOVI
5
0
PAII
4
0
3
0
0
2
0
0
Pulse Accumulator (PA)
PR1
1
0
Timing System
Technical Data
Bit 0
PR0
0
207