w83627thg Winbond Electronics Corp America, w83627thg Datasheet - Page 101

• Manufacturer Part Number: w83627thg
• Description: Winbond Lpc I/o
• Manufacturer: Winbond Electronics Corp America

CRF6 (GP4[7:0] inversion register. Default 0x00)
When set to a '1', the incoming/outgoing port value is inverted.
When set to a '0', the incoming/outgoing port value is the same as in data register.
7.2
(The CR30,70,F0~F9 are VCC power source; CR E0~E7 are VRTC power source)
CR30 (Default 0x00)
CR70 (Default 0x00)
CRE0 (Default 0x00)
Bit 7 - 1 : Reserved.
Bit 0
Bit 7 - 4 : Reserved.
Bit 3 - 0 : These bits select IRQ resources for PME .
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Logical Device A (ACPI)
= 1 Activates the logical device.
= 0 Logical device is inactive.
: DIS-PANSW_IN. Disable panel switch input to turn system power supply on.
= 0 PANSW_IN is wire-ANDed and connected to PANSW_OUT.
= 1 PANSW_IN is blocked and can not affect PANSW_OUT.
: ENKBWAKEUP. Enable Keyboard to wake-up system via PANSW_OUT.
= 0 Disable Keyboard wake-up function.
= 1 Enable Keyboard wake-up function.
: ENMSWAKEUP. Enable Mouse to wake-up system via PANSW_OUT.
= 0 Disable Mouse wake-up function.
= 1 Enable Mouse wake-up function.
: MSRKEY.
This bit combining with MSXKEY (bit 1 of CRE0 of logical device A) and ENMDAT_UP
(bit 7 of CRE6 of logical device A) define what kind of mouse wake-up event can trigger
an active low pulse on PSOUT#. Their combination is described in the following table.
Reserved
: KB/MS Swap. Enable Keyboard/Mouse port-swap.
= 0 Keyboard/Mouse ports are not swapped.
= 1 Keyboard/Mouse ports are swapped.
ENMDAT_UP
1
1
0
0
0
0
MSRKEY
0
1
0
1
x
x
MSXKEY
1
1
0
0
1
0
- 94 -
Any button click or any movement
one click of left/right button
one click of left button
one click of right button
two times click of left button
two times click of right button
W83627THF/W83627THG
WAKE UP EVENT