w83977atf Winbond Electronics Corp America, w83977atf Datasheet - Page 196

no-image

w83977atf

Manufacturer Part Number
w83977atf
Description
Winbond I/o
Manufacturer
Winbond Electronics Corp America
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
w83977atf-AW
Manufacturer:
Winbond
Quantity:
8
Part Number:
w83977atf-AW
Manufacturer:
MIT
Quantity:
1 000
Bit 7: This bit reflects the complement of the Busy input.
Bit 6: This bit reflects the nAck input.
Bit 5: This bit reflects the PError input.
Bit 4: This bit reflects the Select input.
Bit 3: This bit reflects the nFault input.
Bit 2-0: These three bits are not implemented and are always logic one during a read.
5.3.4 Device Control Register (DCR)
The bit definitions are as follows:
Bit 6, 7: These two bits are logic one during a read and cannot be written.
Bit 5: This bit has no effect and the direction is always out if mode = 000 or mode = 010. Direction is
Bit 4: Interrupt request enable. When this bit is set to a high level, it may be used to enable interrupt
Bit 3: This bit is inverted and output to the SLIN output.
Bit 2: This bit is output to the INIT output.
Bit 1: This bit is inverted and output to the AFD output.
Bit 0: This bit is inverted and output to the STB output.
requests from the parallel port to the CPU due to a low to high transition on the ACK input.
valid in all other modes.
0
1
0
1
the parallel port is in output mode.
the parallel port is in input mode.
The printer is not selected.
The printer is selected.
7
1
6
1
5
4
3
- 92 -
2
1
0
strobe
autofd
nInit
SelectIn
ackIntEn
Direction
Publication Release Date:April 1998
W83977ATF
PRELIMINARY
Revision 0.52

Related parts for w83977atf