w83977atf Winbond Electronics Corp America, w83977atf Datasheet - Page 63

no-image

w83977atf

Manufacturer Part Number
w83977atf
Description
Winbond I/o
Manufacturer
Winbond Electronics Corp America
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
w83977atf-AW
Manufacturer:
Winbond
Quantity:
8
Part Number:
w83977atf-AW
Manufacturer:
MIT
Quantity:
1 000
Bit 4: EPE. This bit describes the number of logic 1's in the data word bits and parity bit only when bit
Bit 3: PBE. When this bit is set, the position between the last data bit and the stop bit of the SOUT
Bit 2: MSBE. This bit defines the number of stop bits in each serial character that is transmitted or
Bits 0 and 1: DLS0, DLS1. These two bits define the number of data bits that are sent or checked in
TABLE 3-2 WORD LENGTH DEFINITION
3.2.2 UART Status Register (USR) (Read/Write)
This 8-bit register provides information about the status of the data transfer during communication.
Bit 7: RFEI. In 16450 mode, this bit is always set to a logic 0. In 16550 mode, this bit is set to a logic
DLS1
3 is programmed. When this bit is set, an even number of logic 1's are sent or checked. When
the bit is reset, an odd number of logic 1's are sent or checked.
will be stuffed with the parity bit at the transmitter. For the receiver, the parity bit in the same
position as the transmitter will be detected.
received.
(1) If MSBE is set to a logical 0, one stop bit is sent and checked.
(2) If MSBE is set to a logical 1, and data length is 5 bits, one and a half stop bits are sent and
(3) If MSBE is set to a logical 1, and data length is 6, 7, or 8 bits, two stop bits are sent and
1 when there is at least one parity bit error, no stop bit error or silent byte detected in the FIFO.
In 16550 mode, this bit is cleared by reading from the USR if there are no remaining errors left
in the FIFO.
0
0
1
1
checked.
checked.
each serial character.
DLS0
7
0
1
0
1
6
5
4
DATA LENGTH
3
5 bits
6 bits
7 bits
8 bits
2
1
0
-44 -
Overrun error (OER)
Parity bit error (PBER)
No stop bit error (NSER)
Silent byte detected (SBD)
Transmitter Buffer Register empty (TBRE)
Transmitter Shift Register empty (TSRE)
RBR Data ready (RDR)
RX FIFO Error Indication (RFEI)
Publication Release Date: April 1998
W83977ATF
PRELIMINARY
Revision 0.52

Related parts for w83977atf