lmc6464amj-qml

Manufacturer Part Numberlmc6464amj-qml
DescriptionLmc6464qml Quad Micropower, Rail-to-rail Input And Output Cmos Operational Amplifier
ManufacturerNational Semiconductor Corporation
lmc6464amj-qml datasheet
 
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
13
14
15
16
17
18
19
20
Page 6/20

Download datasheet (2Mb)Embed
PrevNext
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed
specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test
conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by T
junction to ambient thermal resistance), and T
θ
or the number given in the Absolute Maximum Ratings, whichever is lower.
JA
Note 3: Human body model, 1.5 kΩ in series with 100 pF.
Note 4: Applies to both single supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature of 150°C. Output currents in excess of ±30 mA over long term may adversely affect reliability.
Note 5: V
= 7.5V and R
connected to 7.5V. For Sourcing tests, 7.5V
CM
L
Note 6: Do not short circuit output to V
+
, when V
Note 7: Device configured as a Voltage Follower with a 10V input step. For positive slew, V
negative slew, V
swing is 12.5V to 2.5V, V
I
O
Note 8: Limiting input pin current is only necessary for input voltages that exceed absolute maximum input voltage ratings.
Note 9: Limits are dictated by testing limitations and not device performance.
Note 10: All numbers apply for packages soldered directly into a PC board.
www.national.com
(ambient temperature). The maximum allowable power dissipation at any temperature is P
A
V
11.5V. For Sinking tests, 3.5V
O
+
is greater than 13V or reliability will be adversely affected.
swing is 2.5V to 12.5V, V
I
is measured between 9.0V and 6.0V.
6
(maximum junction temperature), θ
(package
Jmax
JA
= (T
- T
Dmax
Jmax
V
7.5V.
O
is measured between 6.0V and 9.0V. For
O
)/
A