m29dw128g60nf6e Numonyx, m29dw128g60nf6e Datasheet - Page 81

• Manufacturer Part Number: m29dw128g60nf6e
• Description: 128-mbit 8 Mbit X16, Multiple Bank, Page, Dual Boot 3 V Supply Flash Memory
• Manufacturer: Numonyx

M29DW128G
2. A write to buffer program abort and reset must be issued to return the device in read mode.
3. When the block address is specified, any address in the selected block address space is acceptable. However when
4. DQ7 must be checked since DQ5 and DQ7 may change simultaneously.
5. If this flowchart location is reached because DQ5=’1’, then the Write to Buffer Program command failed. If this flowchart
6. See
loading write buffer address with data, all addresses must fall within the selected write buffer page.
location is reached because DQ1=’1’, then the Write to Buffer Program command aborted. In both cases, the appropriate
Reset command must be issued to return the device in read mode: a Reset command if the operation failed, a Write to
Buffer Program Abort and Reset command if the operation aborted.
Table 8: Standard
commands, for details on Write to Buffer Program command sequence.
Flowcharts
81/85