lpc1759 NXP Semiconductors, lpc1759 Datasheet - Page 21

• Manufacturer Part Number: lpc1759
• Description: Lpc17xx Device Highlight
• Manufacturer: NXP Semiconductors

NXP Semiconductors
LPC1759_58_56_54_52_51_4
Product data sheet
7.13.1 Features
7.14.1 Features
7.15.1 Features
7.14 12-bit ADC
7.15 10-bit DAC (LPC1759/58/56/54 only)
The LPC1759/58/56/54/52/51 contain one ADC. It is a single 12-bit successive
approximation ADC with six channels and DMA support.
The DAC allows to generate a variable analog output. The maximum output value of the
DAC is VREFP.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
One or two CAN controllers and buses.
Data rates to 1 Mbit/s on each bus.
32-bit register and RAM access.
Compatible with CAN specification 2.0B, ISO 11898-1.
Global Acceptance Filter recognizes standard (11-bit) and extended-frame (29-bit)
receive identifiers for all CAN buses.
Acceptance Filter can provide FullCAN-style automatic reception for selected
Standard Identifiers.
FullCAN messages can generate interrupts.
12-bit successive approximation ADC.
Input multiplexing among 6 pins.
Power-down mode.
Measurement range VREFN to VREFP.
12-bit conversion rate: 200 kHz.
Individual channels can be selected for conversion.
Burst conversion mode for single or multiple inputs.
Optional conversion on transition of input pin or Timer Match signal.
Individual result registers for each ADC channel to reduce interrupt overhead.
DMA support.
10-bit DAC
Resistor string architecture
Buffered output
Power-down mode
Selectable output drive
Dedicated conversion timer
DMA support
All information provided in this document is subject to legal disclaimers.
Rev. 04.02 — 1 April 2010
LPC1759/58/56/54/52/51
32-bit ARM Cortex-M3 microcontroller
© NXP B.V. 2010. All rights reserved.
21 of 74