lm7915c National Semiconductor Corporation, lm7915c Datasheet

no-image

lm7915c

Manufacturer Part Number
lm7915c
Description
3-terminal Negative Regulators
Manufacturer
National Semiconductor Corporation
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
lm7915cT
Manufacturer:
MOT
Quantity:
2 000
Part Number:
lm7915cT
Manufacturer:
ST
0
Part Number:
lm7915cT
Manufacturer:
FAIRCHILD/仙童
Quantity:
20 000
Part Number:
lm7915cT(L7915CV)
Manufacturer:
ST
0
Part Number:
lm7915cT/NOPB
Manufacturer:
NSTI
Quantity:
17 634
Part Number:
lm7915cV
Manufacturer:
ST
0
© 2001 National Semiconductor Corporation
LM79XX Series
3-Terminal Negative Regulators
General Description
The LM79XX series of 3-terminal regulators is available with
fixed output voltages of −5V, −12V, and −15V. These devices
need only one external component — a compensation ca-
pacitor at the output. The LM79XX series is packaged in the
TO-220 power package and is capable of supplying 1.5A of
output current.
These regulators employ internal current limiting safe area
protection and thermal shutdown for protection against vir-
tually all overload conditions.
Low ground pin current of the LM79XX series allows output
voltage to be easily boosted above the preset value with a
Connection Diagrams
Order Number LM7905CT, LM7912CT or LM7915CT
See NS Package Number TO3B
TO-220 Package
Front View
DS007340
DS007340-14
resistor divider. The low quiescent current drain of these
devices with a specified maximum change with line and load
ensures good regulation in the voltage boosted mode.
For applications requiring other voltages, see LM137
datasheet.
Features
n Thermal, short circuit and safe area protection
n High ripple rejection
n 1.5A output current
n 4% tolerance on preset output voltage
Typical Applications
*
more than 3". For value given, capacitor must be solid
tantalum. 25µF aluminum electrolytic may be substituted.
solid tantalum. 25µF aluminum electrolytic may be substi-
tuted. Values given may be increased without limit.
For output capacitance in excess of 100µF, a high current
diode from input to output (1N4001, etc.) will protect the
regulator from momentary input shorts.
Required if regulator is separated from filter capacitor by
Required for stability. For value given, capacitor must be
Fixed Regulator
DS007340-3
September 2001
www.national.com

Related parts for lm7915c

lm7915c Summary of contents

Page 1

... Connection Diagrams TO-220 Package Front View Order Number LM7905CT, LM7912CT or LM7915CT See NS Package Number TO3B © 2001 National Semiconductor Corporation resistor divider. The low quiescent current drain of these devices with a specified maximum change with line and load ensures good regulation in the voltage boosted mode ...

Page 2

... V − 100 0.5 (−25 V −7) IN 0.5 125 54 66 (−18 V −8) IN 1.1 2.2 0.4 T +125˚C, Power Dissipation J LM7912C LM7915C −12V −15V −19V −23V Typ Max Min Typ Max −14.4 −15.0 −15.6 −12.6 −14.25 −15.75 V −14.5) (−30 V −17. 100 V −14.5) (−30 V − ...

Page 3

... Junction-to-Case Thermal Resistance JC = Case-to-Ambient Thermal Resistance CA = Case-to-Heat Sink Thermal Resistance CS = Heat Sink-to-Ambient Thermal Resistance SA Typ Max JA JA ˚C/W ˚C +125˚C, Power Dissipation J LM7912C LM7915C −12V −15V −19V −23V Typ Max Min Typ Max 15 200 15 200 1 ...

Page 4

Typical Applications Bypass capacitors are necessary for stable operation of the LM79XX series of regulators over the input voltage and output current ranges. Output bypass capacitors will improve the transient response by the regulator. The bypass capacitors, (2.2µF on the ...

Page 5

... Necessary only if raw supply filter capacitor is more that 2" from LM7905 *Improves transient response and ripple rejection. Do not increase beyond 50 µF. Select R2 as follows: LM7905CT 300 LM7912CT 750 LM7915CT 1k Light Controller Using Silicon Photo Cell High-Sensitivity Light Controller Variable Output 5 DS007340-8 ...

Page 6

Typical Applications (Continued) Load Regulation Output Ripple 3000µ Temperature Stability Output Noise 10Hz f 10kHz *Resistor tolerance of R4 and R5 determine matching of (+) and (−) outputs. ...

Page 7

Schematic Diagrams 7 www.national.com ...

Page 8

Schematic Diagrams www.national.com (Continued) 8 ...

Page 9

... National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. inches (millimeters) unless otherwise noted TO-220 Outline Package (T) Order Number LM7905CT, LM7912CT or LM7915CT NS Package Number T03B 2. A critical component is any component of a life ...

Related keywords