wm8941 Wolfson Microelectronics plc, wm8941 Datasheet

wm8941

Manufacturer Part Number

wm8941

Description

Mono Codec With Speaker Driver And Video Buffer

Manufacturer

Wolfson Microelectronics plc

Datasheet

1.WM8941.pdf (94 pages)

Available stocks

Company

Part Number

Manufacturer

Quantity

Price

Company:

Bonase Electronics (HK) Co., Limited

Part Number:

wm8941G

Manufacturer:

MITSUMI

Quantity:

971

Company:

Meier Automation Equipment Co., Limited

Part Number:

wm8941GEFL

Manufacturer:

WOLFSON

Quantity:

20 000

Current page: 1 of 94
Download datasheet (2Mb)

WOLFSON MICROELECTRONICS plc

To receive regular email updates, sign up

DESCRIPTION

The WM8941 is a low power, high quality mono CODEC

designed for portable applications such as digital still cameras

or camcorders.

The device integrates support for a differential or single ended

mic, and includes drivers for speakers or headphone, and

mono line output. External component requirements are

reduced as no separate microphone or headphone amplifiers

are required. A high performance, low power current-mode

video buffer provides inherent short circuit protection.

programmable gain from 0-6dB (6-12dB unloaded), sync-tip

clamp and a 3

construction.

Advanced Sigma Delta Converters are used along with digital

decimation and interpolation filters to give high quality audio at

sample rates from 8 to 48ks/s. A selectable high pass filter and

four fully-programmable notch filters are available in the ADC

path. An advanced mixed signal ALC function with noise gate

is provided, while readback of PGA gain during ALC operation

is supported. The digital audio interface supports A-law and μ-

law companding.

An on-chip PLL is provided to generate the required Master

Clock from an external reference clock. The PLL clock can

also be output if required elsewhere in the system.

The WM8941 operates at supply voltages from 2.5 to 3.6V,

although the digital supplies can operate at voltages down to

1.71V to save power. Different sections of the chip can also be

powered down under software control using the selectable two

or three wire control interface.

WM8941 is supplied in a very small 4x4mm QFN package,

offering high levels of functionality in minimum board area, with

high thermal performance.

integrated

Mono CODEC with Speaker Driver and Video Buffer

video

order input low pass filter for signal re-

buffer

http://www.wolfsonmicro.com/enews/

provided

which

has

FEATURES

•

OTHER FEATURES

•

APPLICATIONS

•

Mono CODEC:

Audio sample rates:8, 11.025, 16, 22.05, 24, 32, 44.1, 48kHz

DAC SNR 98dB, THD -80dB (‘A’-weighted @ 8 – 48ks/s)

ADC SNR 91dB, THD -83dB (‘A’-weighted @ 8 – 48ks/s)

On-chip Headphone/Speaker Driver

Additional MONO Line output

Multiple analog or ‘Aux’ inputs, plus analog bypass path

Mic Preamps :

Differential or single end Microphone Interface

Low-noise bias supplied for electret microphones

Integrated video buffer with LPF and clamp.

Digital Playback Limiter

Programmable high pass filter (wind noise reduction)

4 notch filters (narrowband noise suppression)

On-chip PLL

Low power, low voltage

4x4x0.75mm 28 lead QFN package

Digital still cameras and camcorders

General purpose mono audio CODEC with video buffer

40mW output power into 16Ω

BTL speaker drive 0.4W into 8Ω

Programmable preamp gain

Pseudo differential inputs with common mode rejection

Programmable ALC / Noise Gate in ADC path

2.5V to 3.6V (digital: 1.71V to 3.6V)

Production Data, Rev 4.0, August 2008

WM8941

Related parts for wm8941

Related keywords

wm8941 datasheet
wm8941 data sheet
wm8941 pdf datasheet
wm8941 component
wm8941 part
wm8941 distributor
wm8941 RoHS
wm8941 datasheet download