3b47-t-06 Analog Devices, Inc., 3b47-t-06 Datasheet

3b47-t-06

Manufacturer Part Number

3b47-t-06

Description

Isolated, Linearized, Thermocouple Input

Manufacturer

Analog Devices, Inc.

Datasheet

1.3B47-T-06.pdf (8 pages)

Current page: 1 of 8
Download datasheet (348Kb)

FEATURES

Interfaces, amplifies, filters, isolates, & linearizes analog

input voltages from a J, K, T, E, R, S or B-type thermocouple

Thermocouple input signal is internally linearized

High accuracy internal cold junction compensation.

Module provides +1500 V peak of galvanic transformer-

based isolation with a common mode rejection (CMR) of 160

dB @ 50/60 Hz and a normal mode rejection (NMR) of 60 dB

@ 50/60 Hz.

All 3B47 series modules are mix-and-match and Hot

Swappable.

APPLICATIONS

Industrial signal conditioning

Industrial signal isolation

Industrial signal filtering

PRODUCT OVERVIEW

The 3B Series of Signal Conditioning I/o Subsystems provide a

low-cost, versatile method of transferring analog transducer

signals to a data acquisition, monitoring or control system

without the inherent noise, non-linearity, drift and extraneous

voltages. The modules are designed to directly accept analog

signals from Thermocouples, RTD’s, AC and DC Strain Gages,

Torque Transducers, Frequency Transducers, LVDTs, millivolt

or process current signals. The modules amplify, isolate,

linearize and convert the transducer output signals to

standardized analog inputs for high-level analog I/O

subsystems. The 3B Series Subsystem consists of a 10” relay

rack with universal mounting backplane and a family of plug-in

(up to 16 per rack) input and output signal conditioning

modules.

Eight and four channel backplanes are also available. Each

backplane incorporates screw terminals for sensor inputs and

current outputs and a 26-pin connector for high-level single-

ended voltage outputs to the user’s equipment.

The input modules feature complete signal conditioning

circuitry optimized for specific sensors or analog signals and

provide two simultaneous high-level analog outputs: 0 to +10V

(or +10V) and 4-20 mA (or 0-20 mA).

Rev. 0

Information furnished by Analog Devices is believed to be accurate and reliable.

However, no responsibility is assumed by Analog Devices for its use, nor for any

infringements of patents or other rights of third parties that may result from its use.

Specifications subject to change without notice. No license is granted by implication

or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective companies.

Isolated, Linearized, Thermocouple Input

Output modules accept 0 to +10V (or +10V) single-ended

signals and provide an isolated 4-20 mA (or 0-20 mA) process

signal. All modules feature a universal pin-out and may be

readily hot-swapped under full power and interchanged without

disrupting field wiring.

The Analog Devices 3B Series Signal Conditioning Subsystem is

designed to easily handle signal conditioning problems in

measurement and control applications. Some typical uses are in

microcomputer-based data acquisition systems, programmable

controllers, analog recorders, dedicated control systems, and any

other applications where monitoring of temperature, pressure,

flow and analog signals are required. Since each input module

features two simultaneous outputs, the voltage output can be

used to provide an input to a microprocessor-based data

acquisition or control system while the current output can be

used for analog transmission, operator interface, or an analog

backup system.

Each input module is a single-channel signal conditioner which

plugs into a socket on the backplane and accepts its signal from

the input screw terminals. All input modules provide input

protection, amplification and filtering of the input signal,

accuracy of +0.1%, low drift of +1 uV/

modules), and feature two high-level analog outputs that are

compatible with most process instrumentation. The isolated

input modules also provide +1500 V peak isolation.

The choice of a specific 3B module depends upon the type of

input signal. Input modules are available to accept millivolt, volt,

process current, thermocouple, RTD, AC and DC strain gage,

frequency and LVDT inputs. The voltage output of each module

is available from the system I/O connector while the current

output is available on the output screw terminals.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

Fax: 781.326.8703

FUNCTIONAL BLOCK DIAGRAM

Figure 1. 3B47 Functional Block Diagram

C (low-level input

www.analog.com

3B47

Related parts for 3b47-t-06

3b47-t-06 Summary of contents

Page 1

... High accuracy internal cold junction compensation. Module provides +1500 V peak of galvanic transformer- based isolation with a common mode rejection (CMR) of 160 dB @ 50/60 Hz and a normal mode rejection (NMR 50/60 Hz. All 3B47 series modules are mix-and-match and Hot Swappable. APPLICATIONS Industrial signal conditioning Industrial signal isolation ...

Page 2

... GENERAL DESCRIPTION The 3B47 is a single-channel isolated thermocouple signal- conditioning module which interfaces, amplifies, isolates, protects, linearizes and filters analog input voltages from B-type thermocouple. The thermocouple input signal is internally linearized to provide an output voltage which is linear with temperature, High accuracy internal cold junction compensation and a predictable upscale open circuit indication provide a complete signal conditioning solution ...

Page 3

... Models Available Model Input Type 3B47-J-01 Type J 3B47-J-02 Type J 3B47-J-03 Type J 3B47-K-04 Type K 3B47-K-05 Type K 3B47-T-06 Type T 3B47-T-07 Type T 3B47-E-08 Type E 3B47-R-09 Type R 3B47-S-10 Type S 3B47-B-11 Type B 3B47-Custom Type The CJC sensor accuracy (refer to specification table) should be added to the module accuracy when computing system accuracy. ...

Page 4

... Temperature Range Rated Performance Storage Relative Humidity RFI Susceptibility 1 Current output is not available with model 3B47. 2 Includes the combined effects of repeatability, hysteresis, and nonlinearity wide range of zero suppression and span adjustment is available to enable field calibration. 4 When used with the CJC temperature sensor provided on the 3B Series backplane. Specifications subject to change without notice. ...

Page 5

... PIN CONFIGURATIONS AND FUNCTIONAL DESCRIPTIONS Figure 3 3B47 Input Field Connections Table 1. Pin Function Descriptions— Pin No. Description 1 N N/C ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges ...

Related keywords

3b47-t-06 datasheet
3b47-t-06 data sheet
3b47-t-06 pdf datasheet
3b47-t-06 component
3b47-t-06 part
3b47-t-06 distributor
3b47-t-06 RoHS
3b47-t-06 datasheet download

3b47-t-06 Analog Devices, Inc., 3b47-t-06 Datasheet

3b47-t-06

Related parts for 3b47-t-06

3b47-t-06 Summary of contents

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Related keywords