ledwa70xd5-x Banner Engineering Corp., ledwa70xd5-x Datasheet - Page 2

• Manufacturer Part Number: ledwa70xd5-x
• Description: High-intensity Led Area Light For Use With Presenceplus And Other Vision Systems
• Manufacturer: Banner Engineering Corp.

Dimensions
Light Adjustment
Adjust the light’s intensity by turning the 270° Intensity potentiometer with a small flat-blade screwdriver. Apply power to the light and turn
the potentiometer all the way clockwise for max. intensity. If the object to be sensed is too bright at max. intensity, turn the potentiometer
down a little at a time, testing with the object, until the correct brightness is achieved.
2
Supply Voltage and Current
Light Source
Illumination
Strobe
Operating Voltage: 24V dc ±10%
Strobe Voltage: 5-24V dc @ 15 mA maximum
Current Draw at Full Intensity: 350 mA max
Built-in constant current regulator for LEDs
Adjustable intensity control varies intensity for “P” mod-
els
Five high-intensity LEDs; see models table for wave-
lengths
610 mm (24") diameter usable light pattern at 1 m
Optically isolated
www.bannerengineering.com - tel: [phone]
Back View Front View
Specifications
Connections
Construction
Useful Life
Operating Conditions
5-pin Euro-style (M12) male connector; accessory ca-
ble required for operation, see Cables for options
Enclosure rating: IP50 (when mounted using the two
¼ - 20 holes in back)
Housing: aluminum, black anodized
Window: acrylic, clear with frosted diffusing surface on
inside
50,000 hours (LED ON time). When operated within
specifications, output will decrease less than 30% after
50,000 hours.
Temperature: 0° to +50° C (+32° to 122° F)
Relative Humidity: 90% (non-condensing)
LED..A70XD5-..High-Intensity Area Light
P/N 153956 rev. A