ledwa70xd5-x Banner Engineering Corp., ledwa70xd5-x Datasheet - Page 3

• Manufacturer Part Number: ledwa70xd5-x
• Description: High-intensity Led Area Light For Use With Presenceplus And Other Vision Systems
• Manufacturer: Banner Engineering Corp.

* For Banner-supplied wire.
** When connecting the light to a PresencePLUS Pro controller terminal block, the controller supply must be 24V dc ± 10%.
The following describes available cordset and bracket options for these lights.
Cordsets
LED..A70XD5-..High-Intensity Area Light
For Use with Nickel-Plated Models
Model
MQDC20-506
MQDC20-515
MQDC20-530
P/N 153956 rev. A
Strobe Polar-
Power Wires
Strobe Volt-
ity Control
age Wires
Wire Pur-
NOTE: To meet CE certification requirements, the light needs to be connected to earth ground.
NOTE: These 5-pin cordsets can also be used on 4-pin connector lights.
pose
Cable Wire
Brown (1)
White (2)
Black (4)
Blue (3)
Gray (5)
Color*
(4) Strobe Common
Length
2 m (6')
5 m (15')
9 m (30')
Continuous
common
+24V dc
(1) +24V dc
Mode
open
open
open
On
Description
5-pin cable, straight female Euro-
style (M12) connector at one end,
with flying leads at opposite end.
Active Low: open
Active High: connect to common (Blue wire)
0V dc = ON (Active Low)
0V dc = OFF (Active High)
Strobe common
www.bannerengineering.com - tel: [phone]
Figure 1. Pinouts for Mating Cable
Wiring Table
Accessories
(5)Active High/Active Low
(3) Common
(2) Strobe (+)
Strobed Mode
common
+24V dc
+5 to 24V dc = OFF (Active Low)
+5 to 24V dc = ON (Active High)
Dimensions
44 mm max.
(1.73")
ø 15 mm (0.59")
M12 x 1
Open — Active Low
Pin 02 — Active High
Controller Terminal
PresencePlus Pro
Pin 01 **
Pin 02
Pin 04
Pin 02
Block
3