g9sa-300-sc Omron Corporation, g9sa-300-sc Datasheet

no-image

g9sa-300-sc

Manufacturer Part Number
g9sa-300-sc
Description
Safety Relay Unit Sensor Connector Type
Manufacturer
Omron Corporation
Datasheet
Less Wiring Required with Safety Light
Curtain
Model Number Structure
Model Number Legend
1. Function
2. Contact Configuration (Safety Output)
3. Contact Configuration (OFF-delay Output)
Ordering Information
Safety Relay Unit
Emergency-stop Unit with Sensor Connector
Note: 1. Connect to the sensor connector using a special OMRON F3SN-A/F3SN-B/F3SH-A Safety Light Curtain Connecting Cable. For details,
Accessories (Order Separately)
Connecting Cables (for F3SN-A/F3SN-B/F3SH-A)
Note: The model numbers given in the table are for sets of two Cables, one for the emitter and one for the receiver.
G9SA-@@@@@@-@@
• Sensor connector allows direct connection to OMRON F3SN-A/
• Reduces wiring and prevents incorrect connection.
• Connection to emergency stop switch also supported.
• Conforms to EN standards (TÜV approval).
• DIN track mounting possible.
Safety Relay Unit (Sensor Connector Type)
G9SA-300-SC
F3SN-B/F3SH-A Safety Light Curtains with PNP outputs.
None: Emergency stop
3:
0:
2. The Safety Light Curtain and Connecting Cable are sold separately.
Be sure to read the “Safety Precautions” on page 8.
Main contact
3PST-NO
refer to the information on accessories below.
3PST-NO
None
Appearance
1
2 3 4 5
6
Auxiliary contact
None
Cable length
0.2 m
10 m
15 m
1 m
3 m
7 m
Number of input
2 channels
channels
4. Contact Configuration (Auxiliary Output)
5. Input Configuration
6. Terminal
0:
None: 1-channel or 2-channel input possible
SC:
F39-JCR2C
F39-JC1C
F39-JC3C
F39-JC7C
F39-JC10C
F39-JC15C
None
Connector terminals
Model
Rated voltage
24 VDC
CSM_G9SA-300-SC_DS_E_2_1
G9SA-300-SC
Model
1

Related parts for g9sa-300-sc

g9sa-300-sc Summary of contents

Page 1

... Note: The model numbers given in the table are for sets of two Cables, one for the emitter and one for the receiver. 4. Contact Configuration (Auxiliary Output) 0: None 5. Input Configuration None: 1-channel or 2-channel input possible 6. Terminal SC: Connector terminals Number of input channels 2 channels Cable length Model 0.2 m F39-JCR2C 1 m F39-JC1C 3 m F39-JC3C 7 m F39-JC7C 10 m F39-JC10C 15 m F39-JC15C CSM_G9SA-300-SC_DS_E_2_1 Rated voltage Model 24 VDC G9SA-300-SC 1 ...

Page 2

... VDC −25 to 55°C (with no icing or condensation) 35% to 85% 0.98 N·m Approx. 300 g G9SA-300-SC Model G9SA-300-SC Load Resistive load 250 VAC VDC ...

Page 3

... External relay monitor input (EDM) 92 Twenty four, M3 × 8 5.9 76 max max. G9SA-300-SC C1, D1, D2, E1, and E2. 14.9 dia. Signal name Receiver Emitter Interlock selection input Control output 2 (OSSD2) (INTERLOCK) +24V (24 VDC) +24V (24 VDC) Control output 1 (OSSD1) Test input (TEST) Auxiliary output (AUXILIARY) ...

Page 4

... T21 T22 14 KM1 Timing Chart + Light incident Light interrupted External test switch (S1) F3SJ/F3SN-A/-B/F3SH-A OSSD K3, NC contact K3, NO contact K1 and K2, NC contact K1 and K2, NO contact KM1 and KM2, NC contact KM1 and KM2, NO contact G9SA-300- KM1 KM2 KM2 4 ...

Page 5

... Light incident Light interrupted Reset switch (S1) External test switch (S2) F3SJ/F3SN-A/-B/F3SH-A OSSD K3, NC contact K3, NO contact K1 and K2, NC contact K1 and K2, NO contact KM1 and KM2, NC contact KM1 and KM2, NO contact G9SA-300-SC KM1 KM2 KM1 K1 KM2 ...

Page 6

... Light incident Light interrupted External test switch (S3) Limit switches (S1 and S2) F3SJ/F3SN-A/-B/F3SH-A OSSD K3, NC contact K3, NO contact K1 and K2, NC contact K1 and K2, NO contact KM1 and KM2, NC contact KM1 and KM2, NO contact G9SA-300- KM1 KM2 ...

Page 7

... Light incident Light interrupted Reset switch (S2) External test switch (S3) Limit switches (S1 and S2) F3SJ/F3SN-A/-B/F3SH-A OSSD K3, NC contact K3, NO contact K1 and K2, NC contact K1 and K2, NO contact KM1 and KM2, NC contact KM1 and KM2, NO contact G9SA-300-SC KM1 KM2 KM1 K1 K3 KM2 K2 K3 ...

Page 8

... Refer to the “Precautions for All Relays” and “Precautions for All Relays with Forcibly Guided Contacts”. Precautions for Safe Use • Turn OFF the G9SA-300-SC before wiring the G9SA-300-SC. Do not touch the terminals of the G9SA-300-SC while the power is turned ON, because the terminals are charged and may cause an electric shock. ...

Page 9

... OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ Read and Understand This Catalog Warranty and Limitations of Liability Application Considerations Disclaimers In the interest of product improvement, specifications are subject to change without notice. (c)Copyright OMRON Corporation 2008 All Right Reserved. 2008.12 ...

Related keywords