pssuu150 Wall Industries,Inc., pssuu150 Datasheet

no-image

pssuu150

Manufacturer Part Number
pssuu150
Description
3-pin Input Connector 150 Watt, Single Output Ac/dc Power Supply For I.t.e.
Manufacturer
Wall Industries,Inc.
Datasheet
FEATURES
● Class I Insulation
● Internal EMI Filter
● 3-pin Input Connector
● Power Factor Correction
● Synchronous Rectification
● Power Fail Detect (Optional)
● Over Voltage Protection (Crowbar Design)
● Input Surge Current and Over Load Protection
● Output Voltage Available from 9VDC thru 48VDC
● 2-pin Input Connector Available (See PSSUU151 Series)
DESCRIPTION
The PSSUU150 series of AC/DC switching mode power supplies provides 150 Watts of continuous output power in a
compact, U frame constructed design. This series has single output supplies with a universal input range of 90~264VAC.
These units are ideally suited for use in disc drive systems, microprocessor based systems, portable equipment, and many
other applications. All models meet FCC Part-15 class B and CISPR-22 class B emission limits. These supplies also comply
with UL/cUL (UL 60950-1), TUV/Bauart (EN 60950-1), and new CE requirements. All units are 100% burn-in tested.
SPECIFICATIONS: PSSUU150 Series
SPECIFICATION
INPUT (V
Operating Voltage Range
Input Frequency
Input Current (Low Line)
Input Current (High Line)
Inrush Current (Low Line)
Inrush Current (High Line)
Safety Ground Leakage Current
Start-Up Time
OUTPUT (V
Output Voltage Range
Load Regulation
Line Regulation
Output Power
Output Current Range
Ripple & Noise (peak to peak)
Transient Response
Hold-Up Time
PROTECTION
Over Voltage Protection
Over Current Protection
GENERAL
Efficiency
Dielectric Withstanding Voltage
For Primary to Secondary
Dielectric Withstanding Voltage
For Primary to Ground
Isolation Resistance
Power Factor Correction
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Relative Humidity
Temperature Coefficient
PHYSICAL
Weight
Dimensions
Warranty
SAFETY
EMI Requirements for CISPR-22
EMI Requirements for FCC PART-15
in
)
o
)
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
TEST CONDITIONS
Io = Full Load, Vin = 115VAC
Io = Full Load, Vin = 230VAC
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
Io = Full Load, Vin = 240VAC
Io = Full Load, Vin = 100VAC
Vin = 230VAC
Io = Full Load
Vin = 90 to 264VAC
Full Load, Vin = 90VAC
Io = Full Load to Half Load, Vin = 100VAC
Io = Full Load, Vin = 110VAC
Io = Full Load, Vin = 230VAC
Primary to Secondary
Primary to Ground
Test Voltage = 500VDC
Io = Full Load, Vin = 90~260VAC
Derate linearly from 100% Load at 50°C to 50% load at 70°C
All Outputs
Vin = 220VAC
Vin = 110VAC
Rev B
AC/DC Power Supply for I.T.E.
4242
2121
-0.04
Min
0.95
112
110
0.3
-40
90
47
16
85
50
B
B
0
5
5(L) x 3.21(W) x 1.62(H) inches
Approximately 560 grams
150 Watt, Single Output
See Rating Chart
See Rating Chart
3-pin Input Connector
Nom
0.97
0.5
0.5
0.5
16
56
88
1
3
2 years
PSSUU150 Series
+0.04
Max
0.75
+70
+85
264
150
132
150
2.0
0.8
1.0
63
20
63
90
95
2
5
1
1
4
Class
Class
Unit
%/°C
VAC
VDC
VDC
MΩ
mA
Hz
ms
ms
°C
°C
W
%
%
%
%
%
%
%
A
A
A
A
s

Related parts for pssuu150

pssuu150 Summary of contents

Page 1

... Input Connector Available (See PSSUU151 Series) DESCRIPTION The PSSUU150 series of AC/DC switching mode power supplies provides 150 Watts of continuous output power in a compact, U frame constructed design. This series has single output supplies with a universal input range of 90~264VAC. These units are ideally suited for use in disc drive systems, microprocessor based systems, portable equipment, and many other applications ...

Page 2

... Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 Rev B Output Current 16.0A 12.5A 10.0A 8.33A 6.25A 5.50A 5.00A 4.17A 3.13A 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSUU150 Series 3-pin Input Connector 150 Watt, Single Output AC/DC Power Supply for I.T.E. Total Regulation Maximum Output Power 5% 144W 5% 150W 5% 150W 4% ...

Page 3

... Output connector mates with Molex housing OUT 09-50-3131 and Molex 2478 series crimp terminal. RTN 3. 2 pin input connector available (see PSSUU151 Series). RTN RTN RTN RTN RTN RTN 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSUU150 Series 3-pin Input Connector 150 Watt, Single Output AC/DC Power Supply for I.T.E. ...

Related keywords