dmc50 Yamatake Corporation, dmc50 Datasheet - Page 9

• Manufacturer Part Number: dmc50
• Description: Module Type Controller Control Module / Communication Module
• Manufacturer: Yamatake Corporation

I Base
• Standard base
Mounting screw hole:
Multilink connector
Mounting screw hole
I Terminal Block
I Module Connection
• In the case of the standard base, the DMC50 can be connected to other modules by using the multilink connectors on the right
• In the case of the extension base, each linked module can be independently wired from the extension terminals on the right
• Connect the DMC50 modules together before mounting them onto the DIN rail or screw mounting.
• By linking the modules in this way, wiring can be minimized for the electrical and CPL communication connections between
2 holes provided.
Used to fix the base with
an M3 screw.
and the left sides of the base.
side of base unit. (The left base side can be connected with a standard base.)
each module.
(Module model numbers: CH200, CH400, CS200,
CS400, MR200, ME200)
Analog output connector
Analog input terminal
1
2
3
DIN rail locking clip:
Used to fix on the DIN rail.
Digital input/output connector
Number
Terminal block cover
Power supply
terminals
Multilink
connector
1
2
3
Signal name
DC24V (+)
DC24V (–)
FG
9
Mounting screw hole:
2 holes provided
Used to fix the base with
an M3 screw.
Multilink connector
Mounting screw hole
• Extension base
(Module model numbers: CH201, CH401, CS201,
CS401, MR201, ME201)
1
2
3
DIN rail locking clip:
Used to fix on the DIN rail.
DA
DS
SG
FG
Number
Power supply terminals
Extension terminal
(for connection to remote
DMC50 modules)
1
2
3
Signal name
DC24V (+)
DC24V (–)
FG