D2547P17 AGERE [Agere Systems], D2547P17 Datasheet - Page 2

• Manufacturer Part Number: D2547P17
• Description: Wavelength-Selected High-Power D2587P-Type (with Wavelength Locker)/D2547P-Type Isolated DFB Laser Modules
• Manufacturer: AGERE [Agere Systems]

Wavelength-Selected, High-Power D2587P-Type (with Wavelength
Locker)/D2547P-Type Isolated DFB Laser Modules
Description
Principles of Operation (Controlled Wave-
length)
The single-channel, wavelength-selected DFB (ILM) pack-
age contains internal wavelength-discriminating optics, i.e.,
two etalons and associated photodiodes. The output con-
sists of analog signals suitable for controlling the electrical
current of the thermoelectric cooler (TEC) and the DFB
laser.
Controlled Feedback
The module contains an internal optical isolator that sup-
presses optical feedback in laser-based, fiber-optic sys-
tems. Light reflected back to the laser is attenuated a
minimum of 30 dB.
Controlled Temperature
An integral TEC provides stable thermal characteristics.
The TEC allows for heating and cooling of the laser chip to
maintain a temperature of 25 °C for case temperatures from
–25 °C to +70 °C. The laser temperature is monitored by
the internal thermistor, which can be used with external cir-
cuitry to control the laser chip temperature.
Controlled Power
An internal, InGaAs, PIN photodiode functions as the back-
facet monitor. The photodiode monitors emission from the
rear facet of the laser and, when used in conjunction with
control circuitry, can control optical power launched into the
fiber. Normally, this configuration is used in a feedback
arrangement to maintain consistent laser output power.
Standard Package
The laser module is fabricated in a 14-pin, hermetic, metal/
ceramic butterfly package that incorporates a bias tee that
separates the dc-bias path from the RF input. The RF input
has a nominal 25
The laser module is equipped with Fujikura * polarization-
maintaining fiber (PMF). The fiber is PANDA type and is the
same fiber that is used on the Agere Systems Inc. lithium
niobate modulators. It has a mode field diameter of
10.5 m, a cladding diameter of 125 m ±3
loose tube jacketed fiber 900 m in diameter. Figure 1
shows the orientation of polarization in the fiber.
2 2
(continued)
impedance.
m, and a
Agere Systems’ optoelectronic components are being qual-
ified to rigorous internal standards that are consistent with
Telcordia Technologies
manufacturing operations are ISO
module is being fully qualified for central office applications.
* Fujikura is a registered trademark of Fujikura Ltd.
† Telcordia Technologies is a trademark of Telcordia Technologies
§ ISO is a registered trademark of The International Organization for
Pin Information
Table 1. Pin Descriptions
1. A positive current through the thermoelectric heat pump cools the
2. Both leads should be grounded for optimum performance.
Pin
Inc.
Standardization.
laser.
10
11
12
13
14
1
2
3
4
5
6
7
8
9
Figure 1. Polarization-Maintaining Fiber
Thermistor
Thermistor
Laser dc Bias
(Cathode) (–)
Back-facet Monitor
Anode (–)
Back-facet Monitor
Cathode (+)
TEC (+)
TEC (–)
Case Ground
Laser Anode (+)
RF Laser Input
Cathode (–)
Laser Anode (+)
NC
Photodiode 2 Anode
Photodiode 1 Anode
D2587P-Type
1
1
†
2
2
TR-NWT-000468. All design and
Thermistor
Thermistor
Laser dc Bias
(Cathode) (–)
Back-facet Monitor
Anode (–)
Back-facet Monitor
Cathode (+)
TEC (+)
TEC (–)
Case Ground
Case Ground
Case Ground
Laser Anode (+)
RF Laser Input
Cathode (–)
Laser Anode (+)
Case Ground
§
Data Sheet, Rev. 2
9001 certified. The
CORE
STRESS ROD
PRINCIPLE POLARIZATION
AXIS
CLADDING
INNER COATING
(SILICON & ACRYLATE)
OUTER COATING
D2547P-Type
Agere Systems Inc.
1
1
July 2001
2
2
1-771(C).a