icx074al Sony Electronics, icx074al Datasheet - Page 14

• Manufacturer Part Number: icx074al
• Description: Diagonal 8mm Type 1/2 Progressive Scan Ccd Image Sensor With Square Pixel For Eia B/w Video Cameras
• Manufacturer: Sony Electronics

5. Dark signal
6. Dark signal shading
7. Lag
8. Uniformity between output channels
Measure the average value of the signal output (Vdt [mV]) with the device ambient temperature 60°C and the
device in the light-obstructed state, using the horizontal idle transfer level as a reference.
After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark
signal output and substitute the values into the following formula.
Adjust the signal output value generated by strobe light to 150mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following
formula.
Lag = (Vlag/150)
Set to standard imaging condition I. Measure the signals at signal output 1 (V1) and at signal output 2 (V2),
and substitute the values into the following formula.
Vdt = Vdmax – Vdmin [mV]
V =
I V2 – V1I
V1
Strobe light
Output
timing
FLD
SG
100 [%]
100 [%]
Light
Signal output 150mV
– 14 –
Vlag (lag)
ICX074AL