em91403 ELAN Microelectronics Corp, em91403 Datasheet - Page 6

• Manufacturer Part Number: em91403
• Description: Tone/pulse Switchable Dialer With Lcd Interface And Dual-tone Melody Generator Tone/pulse Switchable Dialer With Lcd Interface And Dual-tone Melody Generator
• Manufacturer: ELAN Microelectronics Corp

* This specification are subject to be changed without notice.
Redialing:
Repertory memory
Storing of 3 sets memory
Dialing (after memory dialed out, the content of LNB is keeping to current data)
Pause (P) key operation
The Pause (P) key is designed to support pause operation in dialing duration. “P” key can be stored in memory
and it will occupy one digital position.
Pulse to Tone (*/T) key operation
The Pulse to Tone (*/T) key is designed to support toll dialing (long distance call) or PABX system operation.
The “*/T” key can be stored in memory and it will occupy one digital position.
After normal dialing, directly keying F key (or On-Off hook once) and keying RD key on keyboard. The
numbers that are stored into LNB memory will be dialed output.
The EM91403 series incorporated several sets repertory memory and each one can store number up to 16 digits.
These memories were designed to 3 sets types. In memory storing, if stored numbers are more than 16 digits
that only the previous 16 digits can be stored into specific memory. Otherwise, these numbers can be stored
entirely. After memory dialed out, the content of LNB is keeping to current data.
Direct (one-touch) operation
Off-hook (or turn on HF function), push (ST, d1, d2, .. , dn [ST], EMn The numbers d1, d2, .. , dn will be stored
into memory location “EMn”. The “EMn” expressed emergency memory EM1 to EM3.
Direct (one-touch) memory operation
• To select Pulse or Tone mode.
• Off-hook (or Turn on HF function), push “EMn” key. The numbers that are stored in direct memory location
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function), push (d1, d2, .. , dn, RD/P, k1, k2, .. , kn.) These numbers will be dialed
• To select Pulse mode.
• Off-hook (or turn on HF function), push d1, d2, .. , dn, */T, k1, k2, .. , kn. These numbers will be dialed out
“EMn” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital number from 1~3.
out as following sequence:
as following sequence:
d1, d2, .. , dn, Tp, k1, k2, .. , kn.
d1, d2, .. , dn, Tpt, k1, k2, .. , kn.
(pulse mode)
(tone mode)
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
AND DUAL-TONE MELODY GENERATOR
EM91403 SERIES
10.1.1997
6