UPD75238GJ NEC [NEC], UPD75238GJ Datasheet - Page 146

no-image

UPD75238GJ

Manufacturer Part Number
UPD75238GJ
Description
4 BIT SINGLE-CHIP MICROCOMPUTER
Manufacturer
NEC [NEC]
Datasheet
146
6.3 OPERATION AFTER A STANDBY MODE IS RELEASED
(1) If a standby mode is released by a RESET input, normal reset operation is performed.
(2) If a standby mode is released by the occurrence of an interrupt request, bit 3 of the IPS (IME) determines
whether to perform a vectored interrupt when the CPU resumes instruction execution.
(a) When IME = 0
(b) When IME = 1
After the standby mode is released, execution of an instruction (NOP instruction) is restarted
immediately after the instruction which set the standby mode.
The interrupt request flag is held.
After the standby mode is released, two instructions are executed, then a vector interrupt is caused.
However, when the standby mode is released by INTW or INT2 (input of a testable signal), no vector
interrupt is caused and the same processing as (a) above is performed.
PD75238

Related parts for UPD75238GJ