UPC2762TB_1 NEC [NEC], UPC2762TB_1 Datasheet - Page 26

no-image

UPC2762TB_1

Manufacturer Part Number
UPC2762TB_1
Description
3 V, SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER FOR MOBILE COMMUNICATIONS
Manufacturer
NEC [NEC]
Datasheet
NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired oscillation).
(3) The bypass capacitor should be attached to the V
(4) The inductor must be attached between V
(5) The DC cut capacitor must be attached to input pin.
RECOMMENDED SOLDERING CONDITIONS
conditions other than those recommended below, contact your NEC sales representative.
SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
26
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Soldering Method
This product should be soldered under the following recommended conditions.
Note After opening the dry pack, keep it in a place below 25°C and 65% RH for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
For details of recommended soldering conditions for surface mounting, refer to information document
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
accordance with desired frequency.
Package peak temperature: 235°C or below
Time: 30 seconds or less (at 210°C)
Count: 3, Exposure limit: None
Package peak temperature: 215°C or below
Time: 40 seconds or less (at 200°C)
Count: 3, Exposure limit: None
Soldering bath temperature: 260°C or below
Time: 10 seconds or less
Count: 1, Exposure limit: None
Pin temperature: 300°C or below
Time: 3 seconds or less (per side of device)
Exposure limit: None
Note
Soldering Conditions
Data Sheet P12710EJ3V0DS
CC
and output pins. The inductance value should be determined in
Note
Note
Note
CC
pin.
PC2762TB, PC2763TB, PC2771TB
Recommended Condition Symbol
For soldering methods and
WS60-00-1
VP15-00-3
IR35-00-3

Related parts for UPC2762TB_1