UPC277GR-9LG NEC [NEC], UPC277GR-9LG Datasheet

no-image

UPC277GR-9LG

Manufacturer Part Number
UPC277GR-9LG
Description
BIPOLAR ANALOG INTEGRATED CIRCUIT SINGLE POWER SUPPLY DUAL COMPARATORS WITH SMALL PACKAGE
Manufacturer
NEC [NEC]
Datasheet
<R>
<R>
Document No. G17934EJ3V0DS00 (3rd edition)
Date Published December 2007 NS
Printed in Japan
DESCRIPTION
The
single power supply. It includes features of low-voltage operation, a common-mode input voltage that range from V
(GND) level, an open collector output, and low current consumption. Furthermore, these products can operate on a
split power supply and be used for an extensive comparison of various voltages.
The
temperature use, and
A DC parameter selection that is compatible to comparators is also available.
μ
series of comparators.
FEATURES
• Input Offset Voltage
• Input Bias Current
• Voltage Gain
• Pulse Response Time
• Output Sink Current
• Small Package
PC177GR-9LG,
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
The mounting area is reduced to 40% or 66% compared to the conventional 8-pin plastic SOP as shown in the
following diagram.
(Mounting area ratio)
Package
Subject part number
Outline comparison
μ
μ
SINGLE POWER SUPPLY DUAL COMPARATORS WITH SMALL PACKAGE
PC277GR-9LG,
PC277GR-9LG,
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
μ
PC339GR-9LG which are quad types with the same circuit configuration are also available as
μ
μ
PC393GR-9LG is used for general purposes.
μ
PC277MP-KAA,
PC277MP-KAA which expands temperature type is suited for wide operating ambient
±2 mV (TYP.)
17 nA (TYP.)
200000 (TYP.)
1.8
16 mA (TYP.)
μ
μ
s (TYP.)
PC277GR-9LG,
Standard SOP
μ
μ
PC277G2,
5.2
PC393G2
(100%)
The mark <R> shows major revised points.
BIPOLAR ANALOG INTEGRATED CIRCUIT
μ
PC393GR-9LG are dual comparators which are designed to operate for a
6.5
• A wired OR is possible as the open collector is output.
• A low voltage operation is possible. V
DATA SHEET
4.4
μ
μ
μ
PC277GR-9LG,
PC393GR-9LG
PC277MP-KAA,
TSSOP
3.15
(60%)
6.4
+
− V
2.8
TSSOP (2.8 x 2.9)
μ
PC277MP-KAA
: +2 to +32 V
μ
(34%)
2.9
PC393GR-9LG
4.0
2006, 2007

Related parts for UPC277GR-9LG

UPC277GR-9LG Summary of contents

Page 1

PC277GR-9LG, SINGLE POWER SUPPLY DUAL COMPARATORS WITH SMALL PACKAGE DESCRIPTION <R> μ μ The PC277GR-9LG, PC277MP-KAA, single power supply. It includes features of low-voltage operation, a common-mode input voltage that range from V (GND) level, an open collector output, ...

Page 2

ORDERING INFORMATION Part Number Selected Grade Note μ PC277GR-9LG-E1-A Note μ PC277GR-9LG-E2-A Note μ PC277GR(5)-9LG-E1-A parameter selection Note μ PC277GR(5)-9LG-E2-A parameter selection Note μ PC277MP-KAA-E1-A Note μ PC277MP-KAA-E2-A Note μ PC277MP(5)-KAA-E1-A parameter selection Note μ PC277MP(5)-KAA-E2-A parameter selection Note ...

Page 3

EQUIVALENT CIRCUIT (1/2 Circuit) μ A 100 − ABSOLUTE MAXIMUM RATINGS (T <R> Parameter + − Note1 Voltage between V and V Differential Input Voltage ...

Page 4

RECOMMENDED OPERATING CONDITIONS Parameter Power Supply Voltage (Split) − Power Supply Voltage (V = GND) ELECTRICAL CHARACTERISTICS <R> μ μ PC277GR-9LG, PC277MP-KAA, Parameter Input Offset Voltage Input Offset Current Note1 Input Bias Current Voltage Gain Note2 Circuit Current Common Mode ...

Page 5

TYPICAL APPLICATION CIRCUIT EXAMPLE V IN INPUT • Threshold voltage μ μ PC277GR-9LG, PC277MP-KAA − 8 OUTPUT REF − + − V 1.5 (V) ...

Page 6

TYPICAL PERFORMANCE CHARACTERISTICS (T <R> 600 500 400 300 200 With 100 mm x 100 mm, thickness 1 mm glass epoxy 100 substrate (refer to "ABSOLUTE MAXIMUM RATINGS Note 4" ...

Page 7

PC277GR-9LG, PULSE RESPONSE I (OUTPUT FALL) Overdrive 5.1 kΩ − 100 100 Overdrive 100 − −100 5 mV ...

Page 8

PRECAUTIONS FOR USE <R> O The process of unused circuits If there is an unused circuit, the following connection is recommended. O Ratings of input/output pin voltage When the voltage of input/output pin exceeds the absolute maximum rating, it may ...

Page 9

PACKAGE DRAWINGS (Unit: mm) 8-PIN PLASTIC TSSOP (5.72mm (225 NOTE Each lead centerline is located within 0.10mm of its true position at maximum ...

Page 10

PLASTIC TSSOP(2.8x2. NOTE Each lead centerline is located within 0. its true position at maximum material condition. 10 μ μ PC277GR-9LG, PC277MP-KAA ...

Page 11

RECOMMENDED SOLDERING CONDITIONS <R> μ μ The PC277GR-9LG, PC277MP-KAA, recommended conditions. For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales representative. For technical information, see the following website. Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html) Type ...

Page 12

The information in this document is current as of December, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the ...

Related keywords