MC68HC705 MOTOROLA [Motorola, Inc], MC68HC705 Datasheet - Page 130

• Manufacturer Part Number: MC68HC705
• Description: HCMOS Microcontroller Unit
• Manufacturer: MOTOROLA [Motorola, Inc]

Serial Communications Interface (SCI)
Technical Data
130
TCIE — Transmission Complete Interrupt Enable Bit
RIE — Receive Interrupt Enable Bit
ILIE — Idle Line Interrupt Enable Bit
TE — Transmit Enable Bit
RE — Receive Enable Bit
RWU — Receiver Wakeup Enable Bit
This read/write bit enables SCI interrupt requests when the TC bit
becomes set. Reset clears the TCIE bit.
This read/write bit enables SCI interrupt requests when the RDRF bit
or the OR bit becomes set. Reset clears the RIE bit.
This read/write bit enables SCI interrupt requests when the IDLE bit
becomes set. Reset clears the ILIE bit.
Setting this read/write bit begins the transmission by sending a
preamble of 10 or 11 logic 1s from the transmit shift register to the
PD1/TDO pin. Reset clears the TE bit.
Setting this read/write bit enables the receiver. Clearing the RE bit
disables the receiver and receiver interrupts but does not affect the
receiver interrupt flags. Reset clears the RE bit.
This read/write bit puts the receiver in a standby state. Typically, data
transmitted to the receiver clears the RWU bit and returns the receiver
to normal operation. The WAKE bit in SCCR1 determines whether an
1 = TC interrupt requests enabled
0 = TC interrupt requests disabled
1 = RDRF interrupt requests enabled
0 = RDRF interrupt requests disabled
1 = IDLE interrupt requests enabled
0 = IDLE interrupt requests disabled
1 = Transmission enabled
0 = Transmission disabled
1 = Receiver enabled
0 = Receiver disabled
Serial Communications Interface (SCI)
MC68HC705C8A — Rev. 2.0
MOTOROLA